MaxxMEM2 benchmark result thread

[Retired]

the app can be downloaded here (Clean) > http://www.softpedia.com/progDownload/MaxxMEM2-Download-130633.html

Verification..

Screen-shot/cut>

MaxxMEM2
Memtweakit
CPU-Z> Motherboard
And which ram are being used/ brand/model and speed


DDR3> Kingston KVR 1333mhz CL9 / OC 2400mhz CL9



There is no score table nor rankings, its for fun, and for everyone...

MAXXFun

[Retired]

just tested some old OEM sticks.. from the box of glory..





Kingston KVR 1333mhz CL9 ( NO XMP ) / Hynix CFR 2X4GB

running fine at 2133mhz CL9 24/7

Just testing, not finetuned.....

something snapped inside my CPU today (while running Realbench) , and now i got more mhz to play with when it comes to mem



------------------
OC 2180mhz CL9



Had to test the sticks in ROG Realbench..

4670K/1 X Radeon 7970/ Kingston 1333mhz/ Gryphon = 84391


Over and out, MovieTime

[twisted1]

Nice Paw, my CFR will do about the same 2133 CL9 and 2400 CL10.

[Retired]

Sure, they are almost for free (20 usd at fleabay?), and the IC's are the same as many of the 200 USD kits got

they do 2900mhz CL12, but this IMC wont..

[Retired]

WhitePaw wrote:
Sure, they are almost for free (20 usd at fleabay?), and the IC's are the same as many of the 200 USD kits got

they do 2900mhz CL12, but this IMC wont..

well i take that back, just tested.. i think they will do cl 12 also.. but have no real interest to perform further testing at this freq..

[fbm211]

That was from a while ago. I haven't had time to tweak much yet this year as I only have time to play around in the summer I'm sure I start getting back into the game of benching and pushing the now outdated system again. I plan on upgrading the video cards in the next few weeks to 4 GB 680s or a 780ti. Its a hard desicion since I don't know the system requirements of inquisition yet. (For max settings)
I don't currently have the system set up for over clocking. I'll have to start over to refresh my mind of how far I was able to push it last year and if I remember correctly the memory didn't do to well past its stock settings. I think I was able to push it to 2450 MHz.

[Retired]

i got a little curios, these naked stick OC very good, and tight for being Hynix, they OC much better than any Hynix i have tried in the past..

I dont really know what they are, but here are a pic of the Ic's (sorry for the poor quality)

Anyone know? i dont have a clue, its CFR that i can see

[Retired]

Playing with the Kingston KVR 1333mhz sticks..



today i bought really fast mem (awaiting delivery) for the gene VII and the i7, going to retire this Gryphon Z87/iFive now..

[Retired]

i started playing with the Predators, and got stuck for an hour

Seem like my IMC start to say no at just above 3200mhz, i dunno if that is good or bad.. not my kind of overclocking

But i did however submitted this in the Team cup at hwbot, i dont know here it went, but i guess we got some points for it.. ()&/

Kingston HyperX Predator 2133mhz/ OC 3160mhz

Where did it go, where did it go??

[Retired]

I can do 3200mhz with this cpu, but that is not enough

Come on guys, fire up your hynix, rank 7 can be better

[Retired]

i was running the IGPU, does that "steal" OC range from the mem?

Now when i came to think of it