02-07-201912:42 PM - last edited on 03-06-202408:38 PM by ROGBot
Hi, any suggestion how to get my g.skill trident z rgb 2x8gb 4000MHz go more than 3400MHz?
I have tried xmp profiles, manually tweak timings and voltages. Anything over 3400MHz and my computer boots to safe mode and back to bios. Pc tries about 3-4 times, couple of seconds and then shut down and safe mode.
I did have same problem with my HyperX Predator memory 4000MHz. Anything over 3400MHz is no go.
I have lates bios. Motherboard supports those memory*
I have tried bios at default and then xmp and with oc, but nothing changes. * Pc specs.
I9-9900K Evga RTX 2080 TI Maximus XI Formula G.Skill Trident Z RGB 2x8GB 4000MHz Corsair RM1000x 2x500gb ssd Custom loop*
Did not know that only 2 dimms can be problem. I have had always 4 dimm slot mobo and used only 2 of them. But those times i did have only 3200MHz kits and different mobo.
Well i dont need more than 16gb memory and *another 355e for memory kit is not woth it.
I have tried with different slots and different voltages. And both xmp 1 and 2. Tweak mode 2 is something that i have not tried yet.
Is it possible to cause same problem if i put too much voltage for vccio or vccsa?*