cancel
Showing results for 
Search instead for 
Did you mean: 

Maximus VII Hero + i5 4690k

N1ghtWalker
Level 7
Good afternoon!

First of all, I want to introduce myself in the new forum.
I am Hugo, of Portgual. : D

With the config I have, it is stable at 45.
It follows in the bios:
AI Overclock Tuner - Manual
1 - Core Ratio Limit - 45
2 - Core Ratio Limit - 45
3 - Core Ratio Limit - 45
4 - Core Ratio Limit - 45
CPU Core Voltage - Manual Mode - 1.325v
DRAM Voltage - 1.65000v
CPU Spread Spectrum - Disabled
Timings - 11-11-11-28
VRM Spread Spectrum - Disabled
SpeedStep - Disabled
Intel Adaptive Thermal Monitor - Disabled
Dynamic Storage Accelerator - Enabled
SpeedStep - Disabled
CPU C-States - Disabled
PCI-E Speed - Gen2
PCI-EX16_1 Link Speed - Gen3
ASMedia Storage Controller (SATA6G_E12) - Disabled
Anti-Surge Support - Disabled
Everything else is in Optimal Default

Given this OC, should change some parameter? This is because there are certain opcções, which should not be in self.
In the bios put the 45x, but when it is in full, go to the 46x, as you can see in the image.
http://postimg.org/image/w9gavnist/

This is due to the clock bus, move to the correct 102Mhz? I then switch from auto to 100Mhz?
Given that the CPU this stable, wanted to stay with a lights, for the memories.
Should I change the frequency of them, as they can go to 2400MHz? There currently are 800, as you can see in the image.
http://postimg.org/image/waq8p2kml/

Another question I have is how do I decipher the voltages that are here, representing the bios voltages?
http://postimg.org/image/viizc4r1p/

It has different names, and I'm not sure what matches what.
In System Agent Offset noticed that gives + 0.102v, should keep or change to another value?
Thank you!
580 Views
106 REPLIES 106

N1ghtWalker
Level 7
Nate Thanks again! I will do just that! 🙂

Nate152
Moderator
You're welcome N1ghtWalker

If you have any questions feel free to ask and if you have any problems please report.

N1ghtWalker
Level 7
I happen to have, but it's off topic.

N1ghtWalker
Level 7
I happen to have, but it's off topic. It has to do with a flash game (War commander) which is very heavy, taking into account the pc I have. I break's! And then it has to do with windows. Whenever I play the way out, the taskbar does not appear! I have to go to task manager, restart the explorer. Already I was looking, and I find nothing! 😕

By the way, one doubts that I have for many years! What is the best method, so after a clean installation of Windows, install the drivers? Which are? And that order? Thank you ! 😄

Nate152
Moderator
If it's a web browser game I don't know, I haven't played any of those.

After installing windows this is what I do:

Install the LAN driver from the motherboard disk then go to the asus downloads page and install:

1) Chipset driver
2) MEI driver
3) Asmedia USB 3.0 driver
4) Asmedia sata driver
5) Realtek audio driver

After installing those then install the NVidia driver.

N1ghtWalker
Level 7
I'm sorry, one more time, leave the conversation in the middle. But I have to go to sleep, tomorrow is working day and it's late! It's what gives, we are from different countries! lol Then we continue. Excuse. hug

Nate152
Moderator

N1ghtWalker
Level 7
Hi Nate!
For, as is suspected! But I still have a few more questions.

1) Chipset driver
2) MEI driver
3) ASMedia USB 3.0 driver - I do not use USB 3.0. I have nothing for now.
4) ASMedia sata driver - It also does not give use, I do not use this entry.
5) Realtek audio driver

Regarding the sito which draw the drivers. You should only go by the asus site, in this case, or their manufacturers, grab the latest? You have any drawbacks? After this problem, which have the task barrra, and in addition, sometimes the rat blinks or fades. Is suspected that this is some drive I installed, this conflict to do, it is possible?

PS:Well, it was too good to be true! lol
With this overclocking, I had a 12min to play until it was all black and out of the game.
And said the nvidia blablabla, managed to recover. This time, I was more calm, only shifted the core (100) and memory (200). And I notice some small tremors in the tank. And some sort of bug, as the tank "ground yourself" on the road and that. In default it does not happen!

Nate152
Moderator
Ok yep you have the gtx 970 overclocked a little bit too far, it's trial and error so you have to watch and expect things like then when overclocking your graphics card, no harm done though reset to defaults and start over. 🙂

Always go to the asus downloads page and install the latest drivers. As for the task bar problem I'm not sure about that I haven't experienced anything like that. None of the Asus drivers will cause that so it must be something else, as to what can cause that I'm not sure.