Hello guys, as title to clarify some doubts. I'm trying to adjust voltage, until now I've used only -0.80 offset and IA VR LIMIT 1400: with better results then stock settings, vcore 1.35, cb23 ~227000
Now I'm trying to reduce volteges/volt spikes eventually and I found these line working fine with better results in voltages/temps and cb23, that's what I'm talking about:
ACDC = 0.3
LL Calibration = lv 6
Offset= 0.080
Cb= ~23500
Vcore= 1.19
Temps 70 on workload
Also tried this:
ACDC = 0.5
LL calibration = lv 6
Offset= -0.080
Cb= ~23300
Vcore= 1.23
Temps 80/85 on workload
Also pl1-2 181w and Intel settings for all configurations. Now my questions are:
Which one I should use?
The second one has an higher vrdroop?
And is it better?
LL calibration lv6 is safe? I tride to use LLC 5 but with worst results
