- last edited on by
ROGBot
about 3 day ago i clocked my coirsair domintor GT to 2133 as someone teach in someplace in this forum that i don't remember where, my PC i working pristine apart from random crashes in dota 2 and a GPU driver crash that happened after the clock (didn't happen again after a patch release in the other day). I tested the new Tomb Raider and Hitman Absolution with everything on max and nothing wrong happened. Yesterday i was watching The International 3 and a notice box appeared in the corner saying something about a voltage problem (it close itself before i could read it...). Next thing i noticed it was the mobo sensor was displaying
what i marked on the screenshot as red and with "0 V" oppose to this numbers that now displays. The PC was still working fine
and i watched the tournament till the end and turned off the PC, so it crashed. i didn't care at the moment. This morning i turned
on and nothing happened. next to that i tryed to remove the memory 1 by 1 and start the PC, the result was the same even
without any memory then i noticed the CPU led was on, then i holded the start button on the mobo to try this soft mode (manual) with only 1 memram on it, still nothing, put the other 3 mem on it again and tryed again with this soft mode, nothing. Just tryed to turn the PC on again and for some unknow reason it worked normally. The PC still on 2133 and working fine, any hint?
sorry if my english is horrible, did the best i could, hope that's understandable
what i marked on the screenshot as red and with "0 V" oppose to this numbers that now displays. The PC was still working fine
and i watched the tournament till the end and turned off the PC, so it crashed. i didn't care at the moment. This morning i turned
on and nothing happened. next to that i tryed to remove the memory 1 by 1 and start the PC, the result was the same even
without any memory then i noticed the CPU led was on, then i holded the start button on the mobo to try this soft mode (manual) with only 1 memram on it, still nothing, put the other 3 mem on it again and tryed again with this soft mode, nothing. Just tryed to turn the PC on again and for some unknow reason it worked normally. The PC still on 2133 and working fine, any hint?
sorry if my english is horrible, did the best i could, hope that's understandable
