Hi, i got a huge problem. I'm worry about hardware damage.
I'm running CPU 2600k on the GENE-Z GEN3. The MB has the BIOS 3203 (i know this is for ivy bridge) and i get the debug A0. I can't downgrade the BIOS to 0402.
I'm runing normally, and the PC shutdown from nowhere! :mad: Try to turn on but nothing happens, just the power/reset buton turn on but i press them and nothing. wait for seconds and it tries to turn on but shutdown before it get into the BIOS.
I tried removing the RAM, Video card, Clear de CMOS (with the bridge too). Everything. The PC works for hours, the next day shutdown again, and Pc appears to need to rest. or something.
I ran Prime95 for hours, sometimes shutdown, sometimes not. I ran the Intel burn test at maximum and nothing happens.
The power supply was plugged in a PSU (900w) the first time that happened. Then i changed to surge protection only. The shut-down is very random.
¿Is the CPU, memory or BIOS?
I'll appreciate your help. Regards.
RAM Corsair DDR3 Vengeance 1866MHZ
Kingston HyperX 3K 120gb SSD
Power Supply: Corsair TX750
All the hardware is new.