formula vi will only recognize 1 hdd

[basebilljr]

hi ladies and gents first time on the form..just put together my first ever PC build with the Formula VI and haveing some
problems..so as of right now im trying to run 2 samsung 840 pro ssd's in raid 0 but inside the UEFI it will only recognize one hdd at a time and im getting a Q code A2....so far i have tried updating the UEFI, cleared cmos, tried multiple sata cables, tried multiple sata ports and nothing has worked and i have ran out of ideas...Any ideas???????


my build

Mobo- Asus formula VI
CPU- i7 4770k
CPU Cooler- H100i
RAM- 32gb - G.Skill Trident X - 2400mhz
GPU- Asus 780ti
PSU- Corsair AX1200i
HDD- 2x samsung 840 pro 256gb & 4x WD Black 2tb

[kkn]

ssd's must be in intel ports ( look in the manual ) and the hdd's you can put in the asmedia ports ( look in manual ).

[HiVizMan]

If you have both SSD on the SATA 6G ports. Set SATA mode in bios, and you have configured your RAID array then you are good to go.

Check your sata ports used.

[Zeruel]

Should of just got the 512 samsung SSD 🙂 Those things are already fast.

[HiVizMan]

OP have you sorted this out?