cancel
Showing results for 
Search instead for 
Did you mean: 

Double Take

martyn
Level 10
The system is a
Rampage iv Extreme
3930 i7
32gb Corsair Vengeance
Thermaltake Water 2.0 Pro
Matrix HD 7970 x 2 in crossfire
Creative Fatality Champion Soundcard - With front drive bay
Themaltake Toughpower XT Gold 1475 watt power supply
Samsung SSD 830 512gb
Samsung 1TB HD x 2
Samsung Blu Ray drive
Samsung DVD drive
Windows 7 Ultimate - full version not an upgrade edition

BluRay is device E
DVD is device G

When i insert a disc into either drive it fails to run and i have to open the drive and reinsert it a second time before autoplay kicks in or i can examine the drive disc contents - what is wrong please? How can i correct this?
My Op system is on an SSD how long should it take to load estimated? SSD is 217gb free of 476gb
Rampage iv Extreme.....3930 i7.....32gb Corsair Vengeance....Thermaltake Water 2.0 Extreme....Matrix HD 7970 x 2 in crossfire....Creative Fatality Champion Soundcard - With front drive bay....Themaltake Toughpower XT Gold 1475 watt power supply.....Samsung SSD 830 512gb...Samsung 1TB HD x 2....Samsung Blu Ray drive....Samsung DVD drive...Windows 7 Ultimate....Thermaltake Overseer RX-1 case
324 Views
6 REPLIES 6

Chino
Level 15

to the intel ports...... using a hd on the asmedia only
Rampage iv Extreme.....3930 i7.....32gb Corsair Vengeance....Thermaltake Water 2.0 Extreme....Matrix HD 7970 x 2 in crossfire....Creative Fatality Champion Soundcard - With front drive bay....Themaltake Toughpower XT Gold 1475 watt power supply.....Samsung SSD 830 512gb...Samsung 1TB HD x 2....Samsung Blu Ray drive....Samsung DVD drive...Windows 7 Ultimate....Thermaltake Overseer RX-1 case

Have you tried logically unmounting each drive and remounting? I would force unmount through DISKPART and bring them back in.

Also, try restarting the Virtual Disk Service as it ties into the Disk Manager. Have you tried these drives in another system? I see they are both Samsung, have you looked possible firmware updates?
i7-3820 @ 5.0Ghz - RIVF - 32GB Kingston @1866 - Gigabyte Radeon 7970 x2 - Cosair Force GT 240GB x2 (RAID 0) - WD 2TB 7200 (RAID 1)

HiVizMan
Level 40
Why are there two threads the same?
To help us help you - please provide as much information about your system and the problem as possible.

HiVizMan wrote:
Why are there two threads the same?


Because i had little response where i originally posted it and thought i would open the thread up into a general forum rather than a rive specific one in the hopes of getting ideas. I thought perhaps it was some simple thing i was missing out doing when building my system, but i have another win 7 system i built that operates ok with samsung drives also.

I will explore diskpart and see what it does if i have it. Up to now i have only removed the drives in device manager and then reinstalled them with no joy.
Rampage iv Extreme.....3930 i7.....32gb Corsair Vengeance....Thermaltake Water 2.0 Extreme....Matrix HD 7970 x 2 in crossfire....Creative Fatality Champion Soundcard - With front drive bay....Themaltake Toughpower XT Gold 1475 watt power supply.....Samsung SSD 830 512gb...Samsung 1TB HD x 2....Samsung Blu Ray drive....Samsung DVD drive...Windows 7 Ultimate....Thermaltake Overseer RX-1 case

HiVizMan
Level 40
Ah ok 🙂

On the other system do you have the Samsungs on the same SATA controllers? Can you test your Samsungs on the Intel SATA controllers.
To help us help you - please provide as much information about your system and the problem as possible.