Hi ,
couple of day ago i installed cooler master hyper D92 air cooler using only pea size thermal paste, i connect both cooler fans with
provided splitter and connect to single cpu connector. but I am having the same temperature as i was having with the stock intel
cooler.
Min = 35 degrees
Max = 45 degress
chassis - cooler master 690III. one 200mm fan in front and one 120mm fan at rear.
my room temp can be around 26-28 degrees these days
do i have to change any settings in BIOS. currently every setting in BIOS is default and the BIOS version is 1603.
thanks
