Bsod 101

[Gnarly]

It weird all of a sudden all I am getting while attempting to overclock is a BSOD 101. No 124's which is what I am used to on my other board. I have tried numerous overclocks and am still getting that stop number. I suspect it is not VCORE but I could be wrong.

Any help would be greatly appreciated....

TIA

[HiVizMan]

Don't stress it Gnarly happens to me all the time the double posts.

You say you changed your ram. Now do you use a XMP profile for your ram by any chance?

[Gnarly]

Ni, I use manual settings for ram

[HiVizMan]

Hmm that is interesting.

Have you tried to use the XMP profile and seen any difference as yet?

[Gnarly]

Yes tried XMP. Same problem.Weird

[Gnarly]

If I jack up the Vcore Primes runs more passes. So I do believe it is in fact the Vcore. Although an excessive amount,,,,

[HiVizMan]

The thing that I do when I change any component of my systems (mainly RAM like you have done) is start my OC from scratch. The reason is because of the fact that CPU are tasked to do so many things now. IMC for memory, PCIe controller for graphic and all the rest too. That often means you need a unique bios configuration for optimal settings. While plug and play does work, working and being optimal is not the same thing.

You have the time to start again? Or maybe go back to the other ram?

[Gnarly]

I have the time. LOL. I have as 4 set of 2133 and 4 set of 2400.

I am just now starting from scratch.

Thanks Buddy

[HiVizMan]

Replied to pm.