Hi guys..So i tried to overclock today fallowing this thread http://rog.asus.com/forum/showthread.php?11120-Overclocking-The-Core-i5-2500K-With-Maximus-IV-GENE-Z-To-An-Easy-4.4GHz&country=&status= i tried to go for 4.5 instead of 4.4 but after 35min...
hello thereI had a problem yesterday with one of my boards which thanks to the quick replies has now been resolved I now face another problem with a different board I have the Maximus Gene-z and I was running it on the on board graphics which was fin...
I Recently bought an asus maximus iv extreme z motherboard from asus and the bios did not support my new IVY BRIDGE processor. it got messed up when i tried to update the bios through ROG connect. so i will have to RMA my motherboard back to asus in ...
Windows 7 PROBLEM with USB 3.0 PART THREE - Interim Report Rev. 1.0 PLATFORMS Tested:Dell Dimension 4550 3.06 Ghz P4 HT enabledDell Dimension 4500 2.80 Ghz P4 ADDONICS Host Controller 2-Port USB 3.0 PCI - AD2U3PCIWD My Book Essent...
Windows 7 PROBLEM with USB 3.0 PART FOUR - Green Shoots Rev. 1.1 " PART of the PROBLEM, part of the solution "SYMPTOMS: Original application of change to Registry (Edit)On a computer that is running Windows 7 or Vista with Servi...
Windows 7 PROBLEM with USB 3.0 , For Some Rev. 1.2 ...
Hello GuysIm completely new to OC,, I just put a Z9PE-D8-WS on my case and an I7 on the CPU1 slot.With defaults values on Bios I can boot and installed Windows 7 64.I have 8GB of DDR (2x4GB) and Im also watercooling.This is just a rig for learning, ...
I'm entering entering a contest held by Artic, and I need to know how hot I can get my GPU, well, I need to know how hot I can safely get it to, because I need the highest temperature difference possible. I'm running a reference 6950 with the 6970 bi...
hi there to anyone who is reading this i have a problem with my on board graphics i have a Maximus V-GENE board and i have taken out the graphics card that i had in there (EVGA GeForce 460) so that it would just run on the integrated i keep getting t...
I posted this in Rampage forum received zero response.Hey, I am wondering if anyone has received "Access violation at address 039BF3A3 in module 'DigiPowerControl.dll' blah blah" on their Digi +power control in your AI suite II (new version too)I act...
 (Custom).jpg "grassy"){kind=avatar}
