Overclocking & Tweaking
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Putting in my SSD tomorrow...a few questions

Hi everyone, first post on the forums. Just got my G75 from Best Buy last week, so far I am in love with this thing. I ordered a 64GB samsung SSD to install my OS to and will use the 1TB for everything else. I'm downloading the Windows ISO now, does ...

Cpu Error

I have a Rampage iv gene with an Arctic cooler i30 heatsink.i have the latest bios 1305 installed, on cold mornings when i turn the system on i sometimes get "Cpu Fan Error".The fan is spinning but i believe that since it spins at lower rpms on cold ...

Nathan by Level 7
  • 7 replies
  • 0 kudos

H100 pump probs

ok so i recenrly got a Corsair h100 for my computer, i have it all mounted and stuff but the pump is making a rattling sound like a HDD access, i was wondering if any1 knew a way to fix this issue, iv emailed corsair and they told me to lay down the ...

Out of Options! Please Help

Hi Guys, i don't use these forums very much because most problems i can fix myself. Bellow are the system specs;Intel i7-3960X Core i7 Extreme CPU2 X G.Skill DDR3-1600 16GB Quad Channel [RipjawsX] (32GB Total)Asus RAMPAGE IV EXTREME MB, Socket 201...

murbs by Level 7
  • 6 replies
  • 0 kudos


Hi All, I am quite sure this will be the only post that you see here from me. Many will most likely not be able to read this as I am also quite sure this post will be removed shortly. I have always been a loyal ASUS customer and have built roughly 10...

Push Pull Rad For Water Cooling?

I am setting up my first water cooling system this weekend (excited) and have a quick question.I plan to install the Rad on the outside of the case using a Koolance extend bracket: The rad will then be able to accommodate 5 fans. Should I use a push...

Gnarly by Level 7
  • 18 replies
  • 0 kudos

Help OC New Build RIVE + i7 3820 + CMZ16GX3M4X1866C9R

Hi, as the title states, I would like to see if someone can help me OC my CPU and RAM.With XMP profile I get 3,8GHZ processor and DDR3@1866MHZ and when I check voltage it's 1.21v in CPUzI have now OCed my CPU till 4092MGHz and everything seems runnin...

RIVE RAID 0 Problems

Hey Guys n Gals, The setup i'm trying to build currently is:Rampage IV ExtremeWD 300GB 3.5" SATA-III 6Gb/s VELOCIRAPTOR Hard Drive - 10,000RPM x2WD 2TB 3.5" SATA-III 6GB/s Caviar Green Hard DriveCorsair 120GB Force 3 SSDNow all these drives are SATA ...

DeChe by Level 7
  • 2 replies
  • 0 kudos

General Overclocking Questions

Hi again. I've been playing around with overclocking and was able to get my PhenomII 980BE to about 4.3GHz. It would boot into Windows7 and shut down just fine. FSB was about 213 and multiplier at 20.5. I have been using AMD Overdrive to do some ...