Hello, I'm new to PC building and such, But I wish to get used to my build first for about a year or two before overclocking, I'll be getting the motherboard Maximus V Extreme do I have to overclock or can I keep it to a normal MOBO until I'm happy t...
HiI have a question for you all who have IV Asus Rampage Extreme with Intel 3930KIn the device manager in the Intel (R) Xeon (R) CPU if you have your the drivers loaded on all those 52 pc Intel (R) Xeon (R) CPU available? I have 6 Pieces Intel (R) C6...
For the official graphic cards avaible for the G75VW, I was wondering what advantages the 660M has over the 670M.If you have tried both please tell me your experience.Thanks
Hi everyone ,, sorry for the short post but I am in a hurryI bought a computer yesterday , everything seems oky until I turned it on for 30 seconds!!I am using H100 to cool my cpu ,, its running correctly , fans are spinning , pipes vibrates, lights ...
When I attempt to start fan xpert I (again) receive the following error: Access violation at address 0040b590 in module 'AI Suite II.exe'. Read of address 00000002.It was working fine yesterday after a clean install (added a new drive and a h100) :co...
Personal first want to apologize since I have already been opened this topic is rather inappropriate.Well the question I have is this: I am setting up a machine with the following configuration:Case: Thermaltake Commander P / N: B-VN40001W2Nhttp://ww...
Hi Guys!I was just wondering - I have an Asus G73JW and I've seen several programs that promise to keep your drivers up to date... I usually do updates manually, but do any of you use one of these apps for it, and which would you recommend?I'm not s...
hey guys, my BLCK Frequency is set to 100 yet im getting lower than 100(pls refer to the picture below)it seems to be underclocked when i took it outside from the box and installed it on my system. is there something wrong with it?
hi guys, ddoes anyone have an i5-3570k? if you have one, do you get 100 mhz. at bus speed with intel spread spectrum on? kindly please check for me. im in doubt that my processor is broke and underclocked.
Hi all,Looking for a bit of advice.Any one got any thoughts on 2x 7870(Ghz) vs 1x7970 (1st edition) for 3 screens 1960x1200 at present or poss 2560x1440 (may get lucky with these later in the year).Budget at moment is maxed out with 2x7870s so 2x797...
