Help
Overclocking & Tweaking
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Sign In to Post

C6H new BIOS options available. ???

Running a 3600 on a C6H. I enabled PBO to +200Mhz (Now boosting to 4325 on all 6 cores). I turn off SMT just because this is strictly a gaming rig. I was also trying to get some info on the “Performance Enhancer” setting. Is it the same/better/worse ...

Thick8 by • Level 7
  • 3706 Views
  • 0 replies
  • 0 kudos

Voltage Colors

Can someone explain the significance of the color changes when I manually set dram, vccio/sa voltages on the latest 2102 bios for maximus x formula? I have dram at 1.35v which is yellow while vccio and sa voltages are white at 1.1v each. when I rai...

Maximus VII Gene need help RTL/IO-L

I recently tried to squeeze up performance of my DDR3 memory, it was long story, i used raaja's guide, spent many hours to dial up frequency and finally have found correct timings. But there are the problem, if i try to switch RTL and IO/L - it doesn...

3700x high idle temps CH6

Heya!!I have the Crosshair VI Hero on BIOS 7201, newest available at time of writing and chipset drivers 1.7.29.0115, again, newest at time of writing and my idle voltages are driving me bonkers. I have the 3700x in the board and at idle my voltages ...

Have to delete Realbench folder for every run

Every time I want to run a Realbench benchmark I have to delete the folder and copy paste again from the zip file. It used to do run after run no problem. I did just receive a few updates to windows 1803, could that be the cause? It definitely cau...

tCore i9-9900k to high volt help pl

HelloPC Specs :Core I9 9900K Asus Prime Z390-ACorsair 3200 mhzThe CPU is running stock ad 1.4 voltage and it makes me scaredi don't want to overclock I just want a lower cpu voltage in the bios.Can some 1 pl tel me a normal safe voltage not to high n...

MMXMMX by • Level 9
  • 5408 Views
  • 12 replies
  • 0 kudos

VCCIO/VCCSA Unable to change voltage

Hi. I'm using a maximus x formula motherboard with an 8700k 4.7ghz 1.25vI initially changed the VCCIO/SA voltages to 1.1v and it is rock solid, this was before I upped the core clock to x47. After I raised the multiplier it was still stable, I just...

I9 9900K Maximus X Hero Adaptive Voltage

Hi there guys :).Back in December I decided it was time to upgrade my old rig (I7 2600k) and build a new PC with the following configuration:CPU: I9 9900k (P0 Revision) with Noctua NH-D15SMobo: Maximus X Hero RAM: Corsair CMT32GX4M4K3600C16GPU: EV...

Infinite loop without having checked the box

For some reason I have to delete the realbench folder and unzip it again in order to get it to run benchmark correctly. After one run from a fresh unzipped folder,any subsequent runs either don't start or take so long that it doesn't seem like it's ...