Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Can't get stable need a new board

Hi all,I have been unable to get my Rampage IV Formula stable. After everyone gave me wonderful advice, I realize that I am the weak link. This board is just over my head. I can't get it done. I give up.What board would you guys recommend that doesn'...

Spawn by Level 7
  • 5780 Views
  • 13 replies
  • 0 kudos

1.525 vcore for 3930k

Thats the lowest vcore I can use to get a stable 5 ghz. I have a fairly decent water cooling loop so my idle temps are around 40 and load prime95 is 75 and during gaming temps dont go above 60 or 62.The entire cpu life being shortened argument is not...

DerStig by Level 7
  • 5489 Views
  • 7 replies
  • 0 kudos

Maximus V Formula Sparked

Hey guys i need your help. I tried to screw my maximus v formula while the system was on and i saw a spark somewhere inside the encircled area on the photo belowI really don't know where did the sparks came from.The question is what are those chipset...

Rayhan by Level 8
  • 7499 Views
  • 8 replies
  • 0 kudos

Asus Maximus IV Extreme P67 - No VGA detected

My pc booted to a black screen, it made a long beep followed by 3 shorter beeps. On my 2nd attempt it booted fine. Played Diablo 3 for 1 hour without issues and then decided to restart, to run memtest86 because I suspected my RAM was to blame. And gu...

kifinas by Level 7
  • 4807 Views
  • 3 replies
  • 0 kudos

? input

Is the AMD turbo core actually any good.. ? 8150.

luke by Level 7
  • 2729 Views
  • 4 replies
  • 0 kudos

Pc freezes, help with RAM timings?

I've just bought my first home built pc, (spec. down) It worked just fine until i started gaming, then it crashed, tested the rams om memtest and found a deffect one... So i went back to the store and changed those 4sticks and fought everything would...

14699

Corsair Vengeance 1600Mhz on G73jh

I'm about to change the ram sticks on my G73jh from bestbuy, I've got this one for 2 years now and I think it's about time to give it an upgrade, but was wondering how do I get the sticks to work @1600Mhz since the stock ones are working @1033Mhz, an...

Naz07 by Level 7
  • 6235 Views
  • 4 replies
  • 0 kudos