Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

4 SSDs RAID 0 with Maximus V Gene

Hello guys, Once again I need your help, this time is RAID 0 problem. I currently have 2 SSDs (corsair Force GT 60GB sata3) working in RAID 0 mode, everything is ok. Now I want to upgrade to 4 SSDs. My Maximus V gene has 4 sata3 ports. But as far as ...

camapcon by Level 7
  • 10507 Views
  • 5 replies
  • 0 kudos

Are my BIOS Settings ok?

Hello everyone, I was wondering if my bios setup is ok, could you take a look? (what could make a difference in performance)http://i.imgur.com/2Amir.jpg((((((((((OFFSET MODE IS ON + 0.090 by the way))))))))))My system is:Intel Core i7 3770kNoctua NH-...

I7 2490x ????

hi everyone,seems to be a 3960x engineering sample,has anyone heard about these?

RonanC by Level 10
  • 8057 Views
  • 8 replies
  • 0 kudos

New Board will be here today.

Alright guys. So my new mobo will be here today and I thought it would be a good idea to get some feedback from you pros.I haven't worked with an Asus board for quite some time so I've been out of the loop. You can see the system specs in my sig.If y...

RAM Overclocking help needed

Hello everyone, could someone help me/give me a guide on overclocking my RAM? I know it should be possible with my setup:Intel Core i7 3770k (Overclocked to 4.6 GHz offset mode - stable)Noctua NH-D14Maximus V FormulaCooler Master HAF XVertex 4 - 256 ...

Asus G75VX-T4007h + Rog Gaming Mouse GX850

I have just purchased the new Asus G75-T4007h and a Rog mouse GX850, but where i can find the drivers of the mouse for Windows 8 that is installed in my computer?I'm from Italy, sorry for my bad English.ThanksKinds regard

Polky74 by Level 7
  • 2950 Views
  • 1 replies
  • 0 kudos

RIVA Chasis/OPT Fan Problem

I am having a problem controlling the fan speeds of my fans that I connect to the CHA or OPT fan headers (CPU and CPU OPT works fine). I have 12 fans on my case (3x480 rads), I have 3 of these : http://www.frozencpu.com/products/14982/cab-627/EK_4-Pi...

DerStig by Level 7
  • 7952 Views
  • 13 replies
  • 0 kudos

fx8150 and sab 990 r2

Ok so thought I'd have a little bit of a play with my new system.All I've played with is multiplier and voltage.4.1ghz with 1.25 cpu voltage. Prime stable. Just thought I'd share Any tips welcome

luke by Level 7
  • 1760 Views
  • 0 replies
  • 0 kudos