Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Help with Fanexpert.

I have only just finished rebuilding and changed a few of the fans about, but I can't remember what was originally where. I have written down what is on what set of pins. But, how do I reset Fan Expert 2 to default, so I can assign them again?

JimmyH by Level 11
  • 2977 Views
  • 1 replies
  • 0 kudos

Can't connect

Wondering if it's just me or is something going on because I haven't been able to connect to the server for quite some time now. I get the "Connecting" message endlessly.

Zboe by Level 7
  • 11677 Views
  • 6 replies
  • 0 kudos

so I thought i had a bad cpu...

turns out I have a GREAT ONE lolcould not get it stable without really high vcore..some tuning and a low pll of 1.65vso far I have been able to boot and run cinebench at 5.4 @ 1.575.2 @ 1.48v

RonanC by Level 10
  • 3347 Views
  • 6 replies
  • 0 kudos

Core Temp vs CPU Temp

Hi,I noticed that there is a big difference in the way AI Suite or Aida64 show the temperature compared to RealTemp 3.70.From what I can make of it Realtemp would be showing the core temp and not the CPU temp measured at heatspreader.These are the te...

O.C Using Different Multiplayer Per Core

Hello everyone. I have Maximus V Extreme motherboard with i7 2600k CPU, and I have a question regarding overclocking using different multiplayer for each core.My question is: How exactly can I calculate the proper voltage? Based on which core multipl...

Mr_pOPo by Level 8
  • 2719 Views
  • 5 replies
  • 0 kudos

Trouble with fan xpert2, anyone else?

Has anyone else tried fan xpert2 to any degree? I'm having two problems with it:1. If I create custom fan speed curves I can save them with the "Save" button. Then, when I reboot the system, only the chassis fan settings are applied. The CPU fan curv...

adam2104 by Level 7
  • 40014 Views
  • 15 replies
  • 0 kudos

cpu paste test

Had nothing to do, so why not another scientific testI lapped the cpu with great care, even more..I used an even layer of paste, instead of nap..data>Indoors, running for 10 min, then screen-cut..3930K4,5 ghz idle, 0,848 Vload 1,335vFanspeed, aroun...

Retired by Not applicable
  • 6269 Views
  • 12 replies
  • 0 kudos