Overclocked my new asus maximus v extreme i7 3770k to 4.7 but my asus suite 2 issue
When I log on I keep getting a temp warning about my volts can someone tell me if this is normal or how I can fix it. please and thanks.
Forum Posts
Need help with memory settings for the 990FX r2
Hello everyone! I just bought the Sabertooth 990fx r2 mb for an upgrade and I need some help with my memory, if anyone is willing. I think it would probably be best if I just post my cpuz screenshots, then add any relevent info I can think of. P...
Spec from cpuz v1.61
I'm new here, and this is my first post, so I'm not quite sure how this will look when done.
SSD Question
hey so heres my questioni have asus formula z moboim using a SSD drive.. in bios its set to AHCI mode but if i go into windows and run program called hddscan it says its connected through pci controller it that right?if not how do i fix it no heh won...
Can I overclock to extreme high current with my h100i cooler?
I just got the Rampage IV extreme with the intel 3970x. I have the h100i water cooler. When I go into bios under ai tweaking it gives the option to set to high current extreme OC settings. If I choose that option would it be safe to use with the cool...
3930k Degradation? Not here
Ive been reading ALOT of threads about peoples sandybridge-E processors Degrading to the point where they can no longer get even decent overclocks with it. Im trying to figure out the problem however I cannot replicate it. I have a 3930K here Im runn...
Desktop Computer won't boot
Hey All,Last Christmas I built a desktop computer with a Maximus V Extreme motherboard, and after some minor difficulty got it completely working. Now, two months later, I came home one day and attempted to turn it on. The computer turned on, clicked...
Opt2 Fan Speed Warning
I'm getting an Opt2 Fan Speed warning, and I'm wondering what I should do about it. Does the fan have to be replaced, or is there a setting somewhere that I can use to increase the fan speed or reduce the warning threshold?
MVF UEFI Problem
Hey guys, I don't know why my Maximus V Formula UEFI doesn't stretch out all the way to the grid or border of my monitor. I'm currently using Asus GTX560ti DC2Top. I tested using my old Asus HD6570 and Intel i7-3770K integrated graphics and this did...
HELP! BSOD! Can’t OC from 4.3 to 4.5GHz…
Can’t go from 4.3GHz to 4.5GHz with Offset Over Clock… Hello Guys, I’m perfectly overclocked at the moment at 4.3Ghz with an (-) negative offset of 0.030V, which is allowing me to idle at 1600Mhz with a Vcore of 0.848V; and at a 100% load (4.3Ghz) wi...
