Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Memtweakit under Windows 8 Release Preview

Hello ROG community,I'm only writing to share my experience with Memtweakit when running under Win8 x64 RPon an Asus ROG Rampage 4 Formula board.on Win 7 x64 and with the same default XMP profile for my Corsair Dominator GT memory i used to get aroun...

Looking for a good keyboard cover

I am looking for a keyboard cover for my G75VW-NS71. I first looked to see if I could rearrange my keyboard and put it in Dvorak format, but was unsuccessful at removing the keys. So I looked for a Dvorak cover that I could just lay over the top of m...

3570k won't get over 3800 MHz

I followed this great guide found here.My specs are identical - Maximus V Gene / i5 3570K / BIOS 1604My build is found here.I followed Marshall's guide step by step, but Prime95 won't push past 3800 MHz. I did save (F10) settings in BIOS each time. C...

ventoux by Level 7
  • 30060 Views
  • 45 replies
  • 0 kudos

3930 Rampage IV Extreme OC

Greetings!Need technical help from our in-house professionals :::System specs::::Intel i7 3930kCorsair platinum 1866Mhz @ 32gbAsus Rampage IV ExtremeCorsair Neutron GTX 480EVGA GTX 680 Classified Tri SLICorsair AX1200WatercooledMy inquiries1. do i ne...

phatDUB by Level 7
  • 23203 Views
  • 27 replies
  • 0 kudos

OCing my 8350

Hey guys! I'm pretty new on the overclocking scene but I decided I wanted to push my 8350 as far as I can on my setup. Currently I can run 4.6 at 1.425v and 2.7 vdda. When I make the jump to 4.8 I've tried bumping the vcore to 1.49, 1.5, 1.52 and vdd...

CraZeeY by Level 7
  • 3048 Views
  • 0 replies
  • 0 kudos

Rampage IV Extreme/3930k OC Help Needed

Hi All-New to the forum, but long time owner of the Rampage IV Extreme. A while back when I first got my board, I had a rock solid stable OC of 4.8 on my 3930k with water cooling. Recently, I updated the BIOS and lost my OC profile and now for the ...

Need help with setting Offset

Hi,I am having a small issue setting offset so when I am at the desktop, the CPU speed and voltage goes down when not under load. I followed the guide and have the settings set up as per the instructions in Raja's guide, but CPU-Z is still reporting...

Turned off HPET, but TSC is unstable - any help?

TSC synchronization [CPU#0 -> CPU#1]:Measured 45807324137 cycles TSC warp between CPUs, turning off TSC clock.Marking TSC unstable due to check_tsc_sync_source failedMobo - R4ECPU - i7 3970XMemory - Corsair 32GB kit 2400mhzBIOS - 3301OS: Fedora 17Cu...

Vegim by Level 7
  • 33172 Views
  • 17 replies
  • 0 kudos

Switching to ROG from UD3H what do I need to know?

As title says, is there a way to set my memory to XMP and then manually OC the CPU? Also can I disable Asus SUite II from Overclocking the iGPU and only OC the CPU? Is the auto overclocking any good with asus suite ii? I have some experience with the...