Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

OCing my 8350

Hey guys! I'm pretty new on the overclocking scene but I decided I wanted to push my 8350 as far as I can on my setup. Currently I can run 4.6 at 1.425v and 2.7 vdda. When I make the jump to 4.8 I've tried bumping the vcore to 1.49, 1.5, 1.52 and vdd...

CraZeeY by Level 7
  • 3040 Views
  • 0 replies
  • 0 kudos

Rampage IV Extreme/3930k OC Help Needed

Hi All-New to the forum, but long time owner of the Rampage IV Extreme. A while back when I first got my board, I had a rock solid stable OC of 4.8 on my 3930k with water cooling. Recently, I updated the BIOS and lost my OC profile and now for the ...

Need help with setting Offset

Hi,I am having a small issue setting offset so when I am at the desktop, the CPU speed and voltage goes down when not under load. I followed the guide and have the settings set up as per the instructions in Raja's guide, but CPU-Z is still reporting...

Turned off HPET, but TSC is unstable - any help?

TSC synchronization [CPU#0 -> CPU#1]:Measured 45807324137 cycles TSC warp between CPUs, turning off TSC clock.Marking TSC unstable due to check_tsc_sync_source failedMobo - R4ECPU - i7 3970XMemory - Corsair 32GB kit 2400mhzBIOS - 3301OS: Fedora 17Cu...

Vegim by Level 7
  • 32988 Views
  • 17 replies
  • 0 kudos

Switching to ROG from UD3H what do I need to know?

As title says, is there a way to set my memory to XMP and then manually OC the CPU? Also can I disable Asus SUite II from Overclocking the iGPU and only OC the CPU? Is the auto overclocking any good with asus suite ii? I have some experience with the...

Performance issues

Hi folks,I recently build a new system and am experiencing some issues I'm not sure how to best troubleshoot. The new system specs are as follows:Power: SeaSonic X-1250 1250W ATX12V / EPS12V SLI Ready 80 PLUS GOLD Certified Full Modular Active PFC Po...

Asus HD7870 Issue

I recently built a new computer and decided to get an Asus 7870 and want to OC it, but seem to be having some trouble. Everything is all fine and dandy at first when OC'ing it a little at a time then running the furmark benchmark (Oh yeah, I'm using ...