I'm experiencing an issue where if I overclock the 7600 iGPU in my B650E-I, even a little bit - like +50Mhz, when it can do +500Mhz - then use it with e.g. a 4K video or other D3D graphics load, CPU all-core is limited to ~2.7Ghz before it reaches th...
I searched the forum and couldn't find an answer on this. I'm one of those OCD types that likes to know what my PC is doing during POST. I also like to be prompted "press this key to enter setup" so I know which key and when to press it if I want to ...
Hello Everybody, About 4 months ago I purchased a Asus K53ta, At the time it was amazing for all my gaming needs, But now i'm beginning to think the screen needs a bit of an upgrade.Has anyone attempted switching out the stock screen for a higher res...
Fan Xpert2: What can it do for you? Setting up fans, control your fans. Asus Fan Xpert 2: A nice solution to control your Fans by using the Fan Xpert 2 Software, so it seems.I have put it to the test. For the record: I do know there are separate f...
Hi, well my problem is something that never happened to me with any other card it have a red light on the first cable of the pcie and it never turns off even if the pc is completely off except if i turn down the PSU of course and then seeing the gpu ...
Hey fellow OCers.I overclocked 3 12900Ks so far, always relying on same setup:ASUS Z690 Formula with a Corsair Elite Cappellix (360) AIO in a Push/Pull-Config with industrial fans (Cooler rating of 174). Always having the same goal: Max out all-core ...
Hello everyone, I've recently upgraded Bios 4007 to 5201 for 5800x3d and I can't find anymore the PBO settings in bios. Any suggestions ? Thanks
Does anyone have a modified BIOS to unlock hidden features in th G513QY. Or know the key combo to unlock?
I recently installed an Asus ROG Strix 790-e and an i9-13900K. I read about undervolting with Intel's XTU because I would like to get the temps down (90C) when running Cinebench R23. I tried Intel's XTU but when I went to incrementally undervolt the ...
hello all i have z790 apex with 13900k and im running on 150bclk 5.1 4.7 cache if i connect dimm.2 with nvme and its running on m2_1 which is cpu lanes will it damage it or i need to switch to pcie? thanks
