Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Questions on upgrade options

Hi, New to this forum so I'll be brief;I'm looking to upgrade to a Maximus V Formula with Corsair Vengeance Pro 2x 8GB 2400Mhz. Is there anything I need to consider first or should I be fine with the upgrade??Thanks in advance

AshN117 by Level 7
  • 4881 Views
  • 8 replies
  • 0 kudos

Cables for Triple 120hz Monitors w/ 2 GTX 780s

So here's my problem. I have three BenQ XL2420T's and two Asus GTX 780s. I want to run all three monitors at 120hz each. However, each 780 only has 1 DVI-D port. To my knowledge, the only cable that transfers 120hz is DVI-D. I thought that I could si...

lm794 by Level 7
  • 4797 Views
  • 5 replies
  • 0 kudos

CVF-Z powering the FX8350

Hi guys!First i want to say hi to everyone here.I just purchased my CVF-Z motherboard 2weeks ago and now i joined the ROG community,which im proud to be part of it.So my main question here to guys:I have FX8350 cpu which i intend to OC with this beas...

Rasch by Level 7
  • 3783 Views
  • 2 replies
  • 0 kudos

4670k overclock, getting bsod x9c error

Anyworkarounds or indicator on what makes 9c error come alive ?Google says: qpi/vtt needs to be raised. i only found vtt in bios. what is qpi ?Ive got a asus z87 pro with corsair vengeance pro 1866. Ive tried every setting in the book(input voltage,...

Gunlab by Level 7
  • 6924 Views
  • 4 replies
  • 0 kudos

latency boundry??

i was wondering why latency boundry isnt ajustable in memtweaker?or does it have another name perhaps?and also isnt it possible to adjust CL and CR when in windows, or does it needs to reboot then anyway ?

flexnl by Level 10
  • 12805 Views
  • 13 replies
  • 1 kudos

Raid0 on 840 evo SSD + usb windows 8 installation

Maximum GENE VI Z87I have a problem installing windows after creating raid for my two SSDs. On the IRST, it shows the raid drive and it reads bootable --> yes. However, the raid drive does not show up in BIOS as a boot option (My SATA configuration i...

Dissapointing Haswell is dissapointing (OC)

After getting into OCing with my new Haswell I got in June i started hitting the temp barrier with my old mediocre air-cooler.So I've spent ~ 900$ for a custom WC loop + case.ACOOL 480 Rad. D5 pump. EK blocks. AC Aquaero5. etc... CPU & GPU.Primarily...

Maximus V Formula SATA Config & SRT

I am preconfiguring a new system before purchasing all the needed components and have a few questions about the Maximus V Formula...First:There are 4 SATA ports for the Intel Z77 SATA connections (2 at 3Gb/s and 2 at 6Gb/s)There are 4 SATA ports for ...

Baldwin by Level 7
  • 5144 Views
  • 3 replies
  • 0 kudos