Overclocking & Tweaking
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

q-code 62 and VGA led

hi, just sry at first for my bad englishi ve built this pc 1 week ago, all seem like to was fine till the vga (gf 770) begin to have some crash, or i think was that. actuallythe pc is crashed. in a first time the q-code 62 and boot led came on. i ve ...

ivanac by Level 7
  • 29 replies
  • 0 kudos

ASUS Z87 PRO MOBO-System keeps restarting?!? Help!

If I put my pc to sleep through windows=restartIf I put it to hibernate=restartIf I shut it down=turns off...then turns back on! (AKA, RESTART)My mobo is asus z87 PRO and my psu is corsair series tx 850w. None seem to be defective. The psu runs fine ...

nazeim by Level 7
  • 2 replies
  • 0 kudos

Crosshair iv formula Problems

HelloI have a crosshair iv formula and im usin a phenom ii x6 1100t with ddr 3 1600 mhz but when i go to the bios to try to lvl up the memory speed said this cpu does not support cpu lvl up function so how could it be if these cpu is black edition.ty...

Nicolas by Level 7
  • 1 replies
  • 0 kudos

ASUS Rampage IV Gene E5-2650 ES

Running the Most Recent BIOS via Website, but am unable to use E5-2650 CPU.How do I update the microcode filter in my bios to support a E5-2650?I see that the E5-2670 is support via news clippings but After Plugging in my New E5-2650 I am getting a B...

x2dragon by Level 8
  • 6 replies
  • 10 kudos

Maximus VI extreme Q-code 00

Hey folks, After just 5 months my maximus motherboard dosen't boot any more and I get the code 00.I've tried:Remove bios batteryClear cmosThe RAM thing. Last Friday the board posted into the bios. All seemd OK.I flashed the bios to the newest versio...

Another 3930k Degradation Thread - This is no joke

Yes, I believe this also happened to me. It's probably the same thing that was explained here : http://rog.asus.com/forum/showthread.php?19926-3930K-C2-DegradationWhat's happening now is, no matter what I do or what voltage I choose and what RAM freq...

DerStig by Level 7
  • 6 replies
  • 0 kudos

Maximus VI Formula: Adaptive vs Manual Voltage setting

I have set the voltage in Manual when stress testing and now I'm happy with my clock/voltage and wanna set back the voltage to adaptive. Is this the right way of doing it?Manual voltage = The value in the field is the max voltage.Offset Voltage = The...