Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Motherboard wont let system turn on

Dear users:I have a system written down here:ASUS rampage IV extremeI7 4770k6* corsair 2GB 1600 cl91200 watt PSU (which is fine since i check it with PSU checker)2 * GTX 480the problem is:system wont start when I connect it to power source and it wil...

maximus vi hero stuck in boot loop

So I bought a mobo, hooked it up and tried to boot, but now it is stuck in a loop. It starts out by going through the boot process (CPU led, HDD led etc. All burn one by one, when the last one goes out the q-code displays "AE" which according the man...

Denners by Level 7
  • 12157 Views
  • 20 replies
  • 0 kudos

x79-deluxe error code AA

hello, i installed everything today. i just noticed the error code AA stays lit on after booting. is there a problem with the motherboard? thank you.3930kwindows 8.1280x crossfireseasonic x-1050wssd raid 01600 ddr3 ramnothing is overclocked yetedit: ...

yoloswag by Level 7
  • 21051 Views
  • 2 replies
  • 0 kudos

New Z87-A Won't Post with PCI-E card in place

I just build a new machine and for whatever reason I cannot get it to POST if I have my GTX 560 TI connected. I will just get a solid red CPU_LED light. As soon as I disconnect the GPU it will boot fine. I am using the following PSU;http://www.nzxt.c...

Finally made it to 4.8 GHz

Well after my last CPU just up and died overnight, I lashed out and bought a new 3770K. Second run of Realbench V2 I outdid any other score I have had in the past.The stress test handled 4.8 GHz, the temps did not get above 90 deg, but my ambient is...

JimmyH by Level 11
  • 3775 Views
  • 5 replies
  • 0 kudos

Maximus vi Extreme not detecting 3rd R9 290

HiIts been 3 days i am trying to install my third R9 290 gpu but this motherboard seems to come from hell that it does not detect the third Gpu.first gpu connected on the first red colored pcie.second is on the third red pcie.Third i have tried conn...