Oc gtx660m g75vw
Whats the safest numbers to use? and what program should I use?Thanks for you help in advance
Whats the safest numbers to use? and what program should I use?Thanks for you help in advance
I need help offset overclocking. I have manually overclocked to 4.8 and offset to 4.6 but have several things I need assistance with.My main problem is that although my voltage & speed will briefly show that it throttles back, most of the time it sta...
Hi, Have a strange problem, I had an Asus motherbord for my 2011 intel 3.6Mhz processor. Everything worked fine, nice flow in browsers etc..:Now I have installed an Asus Ramepage IV with sam processor etc... Alla drivers, chipset, Windows 8... (Not 8...
I recently oc my i5 4670k using the CPU lvl up in ROG maximus Vl hero and once i choose 4.6ghz, Blue screens start to appear. I am currently having my CPU clocks @4.4Ghz using the same CPU lvl up feature. My Specs are i5 4670k, ROG Maximus Vl Hero, C...
Title pretty much says it all. The charging port on my G46VW has slowly been failing - occasionally it'd stop charging, and I would have to reposition it or jiggle it a bit to get it to charge again. Now, more often than not, it just refuses to charg...
http://rog.asus.com/263162013/overclocking/gallery-extreme-ln2ing-at-the-oc-main-event/
Dear users:I have a system written down here:ASUS rampage IV extremeI7 4770k6* corsair 2GB 1600 cl91200 watt PSU (which is fine since i check it with PSU checker)2 * GTX 480the problem is:system wont start when I connect it to power source and it wil...
Hello there. I was wondering if someone could explain to me in simple words how to enable trim for my raid 0 SSDs. I have the x79-deluxe (gold color) board. I've read a guide here by Nodens, but I can't seem to get it to work. I can't "force install"...
So I bought a mobo, hooked it up and tried to boot, but now it is stuck in a loop. It starts out by going through the boot process (CPU led, HDD led etc. All burn one by one, when the last one goes out the q-code displays "AE" which according the man...
Hello all, I have a quick question. I've got the Z87 Sabertooth, which I know is a TUF board, not a ROG, but given the similarities between the two lines I figure ya'll are the best and most knowledgeable group to shoot a quick question at. My questi...