I am looking for Rampage VI Omega / Encore - for enthusiasts
am interested in purchasing the Rampage VI Omega or Encore full box version - shipping preferably from Europe.I am asking for information with a private message.:)
Forum Posts
G.Skill TridentZ RGB 16GB DDR4-3000 cannot work on Asus Tuf Gaming Z490 at 3000
Hello, I have posted the same thread to General but got no answer. I just bought the intel i5 10400 paired with Asus Tuf Gaming Z490 motherboard. After checking the motherboard's memory compatibility list I chose G.Skill TridentZ RGB 16GB DDR4-3000MH...
How to turn off overclock
HelloHow do you turn off the overclock? When I boot up the splash screen says I'm overclocking at 36 percent. I am not a gamer, I record music, and I need the most reliable setup I can get.I looked in Ai-suite and didn't see anything.Also, I found a...
mapping Intel XTU to BIOS settings for undervolting Coffee Lake on ASUS Prime Z370-A
Hi. I'm attempting to undervolt my Coffee Lake CPU Intel Core i7-8700K (8th generation) which is on the ASUS Prime Z370-A motherboard on Windows 7 (I bought this configuration thanks to info I've seen on phoronix) and I was wondering how to transfer ...
Maximus XI Hero not stable with DDR4 4133 memory and 5GHz
Hi allI'm new to this, but hope someone will help me see if I can get my computer to run stable with full speed on my memory and 5 GHz on the CPU - or at least 4000 MHz on the DRAM frequency.My setup:MB: ASUS ROG MAXIMUS XI HERO (WI-FI)CPU: I7-9700KM...
Old Hardware question
Apologies in advance if this has been asked a zillion times. I searched in the forums, but everything on here seems to be for newer stuff.How do I know if I need to raise other voltages besides my main CPU voltage to either avoid a bottle neck or get...
R6EE with Bizarre Load Line Voltages
This is a new R6EE + i9-10940x running Windows 10 with UEFI Optimized Defaults. The board has not yet been overclocked.I believe this board has a defect with how the 0603 BIOS is controlling the load line voltage. For some reason, XTU reports cu...
How to set Voltage Offset for "CLR (CBo/LLC/Ring) Overclocking" aka "LLC/Ring Offset"
I'm only able to set this Voltage Offset of "CLR (CBo/LLC/Ring) Overclocking" (as seen in hwinfo64) aka "LLC/Ring Offset" (as seen in hwmonitor) by using Intel XTU, as can be seen in the screenshots in my other thread here: https://rog.asus.com/forum...
Why can't change BIOS settings in Adaptive Mode?
If I change CPU Core/Cache Voltage to Adaptive Mode, then reboot, I see the following:then I try to change the Offset Voltage value by typing some numbers(without pressing Enter, yet), looks like this:but then, after I press Enter it reverts to Auto ...
Z490 asus rampage xii formula @ LN2 - Windows crash with 1.4 pll volt or more.
Hello.*We are on LN2 with*asus rampage xii formula ln2.But if we go over 1.39 pll volt Windows cant boot. It crash. We need to go to 1.6 or more for no cold bug on 10900K.Any advice?*
