Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

GPU Tweak II Fan Auto-Calibration Detect Fail

I updated GPU Tweak II to version 2.2.1.0 and wish I didn't. Note to self: never update Asus software again.Anyway. Running Auto Calibration on my Corsair ML fans that are connected to the external fan headers on my 2060 Super Strix the LEDs on the c...

Nero666 by Level 7
  • 1319 Views
  • 1 replies
  • 0 kudos

Mystery 8d error code.

Ladies & Gents...I'm at a loss and wondered if a brilliant mind on here could solve the mystery.When booting my PC I get an intermittent qcode of 8D which isn't listed in the manual for my motherboard. If I press the reset button on my case it usual...

Realbench 2.56 stating wrong cpu info

Im hoping someone can help, but when realbench is collecting pc information, its stating im running a i7 7700. *But my cpu is the i7 9700k. *Also i cant figure out how to upload test results

Asus ROG strix z390-f auto overclocked to 5ghz problem

Hi, I tried to overclock my z390-f board to automatic profile 5ghz since it was available but produced an unexpected result. Normally it takes 3-4 seconds to move from post to booting and 5-10 seconds to boot windows, however after the overclock it n...

Asus RX VEGA 56 ROG Strix OC 8GB - Water Cooling

Hi,I'm getting crazy to find a cooling system compatible with my Asus Radeon RX VEGA 56 ROG Strix OC 8GB HBM2.On the web I found that some one use the VEGA 64 backplate , but on the manufacturers websites noboby garantees the full compatibility with ...

Apex IX mod - Adaptive voltages way too low

Hi,This probably isn't a supported topic here on Asus forums but here goes. For fun I had modded a Z270 Apex IX to run a 9700K cpu using a ported bios from an Apex X. Anyhow afterwards all seemed well for a while but noticed that when set to adaptive...

10900kf Asus Maximus formula xii.

Trying to see how to set everything in the bios to stock for this chip in stead of auto. I don’t want to have the board easily the volts and all. What are the things that need to be turned off in the bios for this board not to save power and all that...

14camse by Level 7
  • 682 Views
  • 1 replies
  • 0 kudos

Corsair DDR4 XMP BSOD

Long time ago i have overclock and it was pretty stable (at least i thought so), but in some game i started to get BSOD Page Fault.I run Prime95 in blend mode and realized i have rounding errors, so i reset my bios to default and started from scratch...

Xopek by Level 7
  • 17847 Views
  • 9 replies
  • 0 kudos