Overclocking & Tweaking
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

New to PC Building, Help

So i recently got my parts for my pcI Currently do not have my GPU.It's all connected properly but no POST, Or boot flash, HDD Makes a soundcpu fan runs,psu fan runs, motherboard bios light, lights up


OC button problem - PLEASE HELP

Hi everyone, I bought an Asus G30AB with The 4th generation Intel® Core™ i5, NVIDIA GFORCE GTX 660 3 GB and Windows 7 - x64My problem is that i can only OverClock trought BIOS and the "SPEED" Button doesn't work - when i press it nothing happensWhat ...

gingash by Level 7
  • 11 replies
  • 0 kudos

4 LED's on 2-pin IDE_LED connector (HDD activity LED)

Hi guys,I was just wondering if I can connect 4 LED's to the frontpanel HDD activity connector?No clue what the specs from the LED's are since I salvaged them from an ancient no-name case, but they are all connected to a single 2-wire which gave me t...

Overclocking Gryphon Z97

Hi Everyone,I'm new to the forum and over-clocking. So, I'm a complete novice. That said, here are my specs:Am using this setup for 3D Parametric Modeling primarily using Inventor SoftwareAsus Gryphon Z97 mATX motherboardFractal Design Arc Mini R2 C...

SLI and Sound Card, Where to Place Components

Hello my wonderful ROGers!I've recently gone SLI with my GTX 780 to get that extra horsepower and make my rig devour all games Unfortunately, I've had a problem spacing them out because I also own a sound card, the Creative ZxR. I currently have a Ma...

VeerK by Level 9
  • 8 replies
  • 0 kudos

BCLK 100 , 195 or 200 whats the deal

Hi,I have been tweaking around on the 4770k on my Maximus VI formula on the standard settings of 100 Mhz BCLK and the standard multipliers for the cores. That works fine and I get up to a decent speed 4600 - 4800 Mhz. I have also been able to tweak t...

Having problems with new build.

Just want to say hi first - new to the forum.So my son and I just got done with our build last night and seemed to be working fine. We were able to load Win 7 drivers, etc... and I started to do updates last night and it just shutdown on me. I can ...

HiJynx by Level 7
  • 5 replies
  • 0 kudos

Some questions about Sabertooth 990fx r2.0[HELP]

Hi,I buy new board,Sabertooth 990fx r2.0,and now i have some questions 1)I have Chiftec power(500W),but he have only 4 pin for CPU,board have 8pin,Can i run FX 8320,whit stock cooler,and no OC?I don't have good GPU,no requires extra power2)Do I need...