I recently purchased a Zenith II Extreme Alpha motherboard and a 3970x cpu. In my rush to order all the parts to put this new build together I may have ordered the wrong memory (G.SKILL Trident Z Royal Series 128GB (4 x 32GB) 288-Pin DDR4 SDRAM DDR...
Hello all,I have a Rampage IV Formula and I recently bought a 750 PCIe drive. I am running on BIOS latest version (5001) and after trying a bit I wasn't able to boot from the drive.What I did was install the drive on a PCIe x8 slot and then boot from...
Hey guys,I'm having trouble getting a system to POST. This system uses an i7 2600K in a Maximus IV Gene-Z Mobo.I have done tons of troubleshooting including testing PSU, CPU, removing Ram, reseating processor, new thermal paste, etc, etc.My next hun...
Hello. I use ASUS Prime Z390 a with 9900k. When i use adaptive voltage with turbo 1.29 ... my CPU VID`s stay near 1.29, but sometime after reboot it stay`s near 1.27 (maximum VID`s) that`s my problem, becouse total VCORE down to 1.24 (LLC6) ... with...
Hi guys, so i bought a new pc and can't go above 3000mhz with the Profile 2 While Profile 1 with 3600mhz rebooting my pc and goes back to the biosMy specsTuf Gaming b550-plus (updated bios to the latest version 1401)CPU AMD 3600XTMemory:Kingston Hype...
cpu 10700kSticker on purchased ram says F4-3600C16-32GTZN DDR4-3600 16gb x 216-16-16-36 1.35vThaiphopon data on the RamModule Manufacturer: G.Skill Module Part Number: F4-3600C16-16GTZN Module Series: Trident Z Neo DRAM Manufacturer: Samsung DRAM Com...
I've never OC'd a cpu, and due to my lack of understanding, have had to resort to paying the $20 insurance fee to intel, to use their Performance Maximizer. I've got a 10900KF on an Asus Tuf Gaming Z490 wifi. It got me a 5.2 passing, but throttled it...
Hey folks,Finally finished my dual loop build, and am trying to determine a good way to control the rad fans and pumps via BIOS. Everything is PWM. I'm on BIOS 1802. Currently I have the following set for each loop:CPU fan -> CPU/CRM pumpChassis f...
I am using 4 x 8GB sticks of Patriot Viper Steel DDR4400 along an i9 10850k and a Maximus XII board.I can only get it to run at 4133mhz which is expected and with the timings below.Voltages I have 1.47 DRAM and 1.30v for VCCIO and SA and I have loade...
Hi,I'm currently without a gpu and i'm trying to connect to the display port of the motherboard and use my intel i5 10600k Internal gpu.HDMI output works fine but displayport seems to be dead, i tried different monitor and different cables but nothin...
