Overclocking & Tweaking
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Stable one day...

....unstable the next. Asus Tuf Gaming X570 Plus Ryzen 9 3950xG.Skill Trident Z 3600 c14American Megatrends Bios 3405360mm Radiator with push/pull fansI don't remember the specifics but the clock speed was only set at 40. I did run a MemTest, overnig...

Two of the CPU Cores always hotter tha the otehr

Hello, today i made a tp replacement on my a53sv. After gaming and benchmarking i noticed that the 2 cores are 2 degree hotter than the other 6.Is that a bit too little thermal paste? As i see those two are always working on a bit lower frequency. O...

XMP profile and bsod.

Hi,So I enabled XMP profile for my G-skill 2x8gb ram which is rated to work @ 3200mhz, pc ended up with bsod.Now I have messed with both xmp profiles before (including cpu oc) and never had any problems. Dump file says ,,FAILURE_BUCKET_ID: AV_nt!MiQu...

Unstable memory D.O.C.P 3600 OC?

Hi all, I am very new to this and any help or guides would be much appreciated. I overclocked the ram on my pc and I have passed the memtest86 test, so I thought everything was fine, after all, it was a simple D.O.C.P (XMP) OC, (@3600 as supported by...

Kappa07 by Level 7
  • 0 replies
  • 0 kudos

Overclocking Guide

Here you can find some overclocking guides to help you out on how to overclock your hardware. Most of those guides have been made by extreme overclockers. MotherboardIntelRampage VI series - X2991. Rampage VI Apex Overclocking guide by ROG R&D Team i...

AkaNe0 by Level 10
  • 72 replies
  • 5 kudos

B550-E Gaming: RAM overclocking

Hello,I've got a ROG STRIX B550-E Gaming with a Ryzen 5900X and a 32 GB kit from G.SKILL F4-3600C16D-GTZN). The IF-clock is stable at 2000 MHz with a SOC voltage of 1.15625 V, but I'm having trouble getting the RAM stable at 4000 MHz. I've experience...

Z390-a Prime will not power off after BIOS update

After completing my new build yesterday, and after flashing the BIOS via the BIOS EZ Flash Utility, the board will no longer power down.Whether I press the power button or manually navigate to "Power down" in Windows, it will act as if it was shuttin...