Overclocking & Tweaking
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

How to run ram on full speed.

Hi,May I ask how can I enable XMP to get my ram on full speed?My Board is Maximus Hero ViiI go to BIOS, extreme tweaker -> Ai Overclock tuner, I see XMP option there.. but that opens a lot of new different options and Im not sure what to do there.. I...

taksdd by Level 7
  • 5550 Views
  • 4 replies
  • 0 kudos

Built my first rig... PLX issues?

Hello all! I've just built my first rig with the following componenets...MAXIMUS VI FORMULA motherboard. ASUS GTX 970 Strix GcardHyper Evo 212 CPU CoolerCS750M Gold Standard PSU...I have 5 fans going at full speed yet my PC keeps 'overheating'. The B...

Neuxchar by Level 7
  • 9583 Views
  • 16 replies
  • 0 kudos

rmp X99-ram- help

i have asus rmp x99 and have 2X8G rams wher do i need to install the rams in the right side or left side or 1 right 1 left and intall it in the red or black slot thanks

killer7 by Level 7
  • 3403 Views
  • 4 replies
  • 0 kudos

My ram is all Effed up?

I have no idea why but for some reason my corsair vengeance 1600 MHZ http://www.newegg.com/Product/Product.aspx?Item=N82E16820233144 CORSAIR Vengeance 8GB (2 x 4GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Desktop Memory Model CMZ8GX3M2A1600C9my moth...

New Rig - Restarts twice before going to windows.

I have new rig with Maximus Hero ViiThere is SSD plugged into Intel Sata6gb there is also Optical Drive plugged into Intel Sata6gb.When I turn my pc it goes on full power of fans ....and restartsnext does it again but after a little bit longer (like ...

taksdd by Level 7
  • 2455 Views
  • 3 replies
  • 0 kudos

PLX Over Temperature Error on M6F

"PLX Over Temperature! ! Press F1 To run Setup" My average temps are:CPU: 33°c - 51°cGPU: 42°c - 60°cMoBo: 38° - 48°cVRM_TEMP1: 63°c -may be over 80°cVRM_TEMP2: 40°c - 70°cVRM_TEMP3: 37°c - 55°c

DNDante by Level 7
  • 3205 Views
  • 3 replies
  • 0 kudos

Can't get PC to go past CPU light

I just replaced my CPU (AMD Phenom II x6) on my Crosshair IV motherboard, but the light still stops on CPU and won't go to DRAM. The CPU can't be bad since I just replaced it. Does this mean my motherboard is bad or my RAM is bad? Or is there another...

Tuning utility will not work after reinstall

I recently purchased a aside g51v used of of Craigslist so far it has been fantastic except that when I installed a 2nd HDD is wouldn't recognize it finally I just took out the old drive and installed a new coppy of windows 7 on the 1tb so that I wou...

Mantree by Level 7
  • 1729 Views
  • 1 replies
  • 0 kudos

R5E to X99-E WS

I was thinking of changing out my Rampage V Extreme for an ASUS X99-E WS; would like some opinions from you all on this. What do you think....would that be a good move. I OC a bit, but, love extreme quality-WS has better capacitors etc. and am all ab...

RickROG by Level 11
  • 1835 Views
  • 0 replies
  • 0 kudos