Hello everyone i have 10900k and motherbord asus z490 xi heroThe cpu on 5200mhZCpu voltage 1.33 loadMy temps in cinbench r15 82cMy temps in cinbench r20 90cMy temps in games 75Does my overclock is good for 24/7?Does my temps and the voltage good for ...
This build is only a few weeks old. Loading the optimised defaults in the BIOS (latest version as of writing) makes the VID higher, which makes the Vcore go above 1.5v, according to HWINFO64. Even with an undervolt and power limits on stock (PBO -> d...
For some reason now when I run lets say Multi Cinebench, my fans spin down lower RPM than when Idle. This doesn't happen on Single core testing. I've reset the bios but nothing works. Any help is greatly appreciated.Setup:Asus B550-AAMD 5600x Stoc...
Hello All,I have been out messing around with overclocking for quite a while, so I forgot a lot of stuff on tweaking. I decided to diddle around with it today and see what I can get out of the old chip.I can overclock to 4.6GHZ with the Vcore at 1.35...
I have been struggling with my Z490-P for a couple weeks now and for clarification I am currently on Bios 1621 although this has been happening since updating 1602 (the version it came with for me).I have managed a stable 5.1 all core OC w/ these set...
I'm new to overclocking so some help would be much appreciated. I'm using a TUF Z590 Plus motherboard and i9-11900KF I watched this video to learn https://www.youtube.com/watch?v=WTb-KmUa6rI&t=1811sIn the video his Core Speed in CPUZ stays at whateve...
In Task Manager the CPU is reported as operating above 4GHz when running various intense programs, but in AMD Ryzen Master most (if not all) CPU Cores are reported as operating well below the base clock speed of 3.6GHz.How do I configure my ASUS Cro...
I am doing, lol.Is there anyway to improve the cpu max performance envelope over the default bios settings or not. I am hitting a limit that throttles the cpu back to 3990 MHZ, 65W package power. And it never hits 4.3 Ghz as far as I can tell, 4.1 or...
Long story short, I needed to replace my "home" server in July. I mixed and matched spare parts on hand and bought a couple. The main components are...-ASUS Rog Maximus XI Hero Z390 - Latest BIOS-Intel Core i9 9900k-4x16GB DDR4 (64GB) Samsung 2666mhz...
(Also posted in Z690 and Build Advice sub-forums, posting here as this pertains to memory overclocking stability) Edit: As an update, having further scrutinized the QVL I did find much better 4x8 sticks with much lower timings and latency. I managed ...
