Hi i have a TUF GAMING Z690-PLUS WIFI D4 and was wondering if there is a alternative software to control fan speed as i have been told armoury crate is rubbish and Ai suite doesnt support windows 10 anymore ?
Crosshair VIII Dark Hero, BIOS 3801, AMD 5900XHad my PPT limit set to 215W in PBO2 settings, but for some reason it was drawing 244W with no load on the CPU. Had to hard restart for it to go back to normal.
Hi,I'm having a strange problem. Even after a complete BIOS reset I can't restore my CPU to its default clock speed. Base clock is supposed to be 3.5GHz with a boost of 4.4GHz, but it just locks itself at 4.0GHz after a BIOS reset. Any ideas what may...
Guys, help please, having problem.Having Rog Strix G15 G513QR Ryzen 9 5900, 3070… 2021got new RAM G.Skills 3200 2x16GB dual channel CL18 , CPU-Z shows in SPD tab- XMP 2.0, so motherboard supports XMPWhen I go to Bios 325 version and go to advanced se...
I have a 5900x and a Dark Hero MB, I built the system back in September 2021 and have had no issue since, that is until today. The MB has the latest bios installed (3801), and all the latest chipset drivers.At this point I don't know if my issue is M...
Im back out at work now, but was having some fun with my new build over the past week:Apex Board12900K All Core OC 5.2P / 4.1E Fixed Voltage 1.285v + (-0.050v) - with EK Velocity 2 Corsair Dominator 32G DDR5 5600 C36 @ 6000 C36Evga 3080Ti FTW3 Ultra...
So I set 1.3v for the CPU Core voltage in the Bios. But in windows with HWInfo64 I see Vcore is 1.144v (not VID), and in CPU-z I see 1.261vWhy are they all different? which one is correct?12900KFAsus Z690 Max FormulaCorsai 360m AIOCorsair 32gb 5600m...
hi i have the STeK COMPUTER INC. G35CZ with RTX 3070 and i-7 10700kf. i have 16gb of RAM ddr4 nvme 3200mhz. when i go into the BIOS i have the XMP dissabled and when i try to enable it there is only "disable" option. does anyone knows how to fix it?
I have a stable overclock with most of my cores at 4.8gHz but am having to run 2 cores lower due to temps. My overclock is 100% stable, my power draw at the wall seems low under full load, at idle am drawing 235W give or take and load is 375W which s...
