Not sure what to make of this. I was swapping out a 6600k for a 7700k, which should have been a simple enough task, now I get no signal.Was running 1206, updated to 3016 with ez flash, booted into the os, surfed around, then shut down to swap chips....
version 2.1 every-time I run it I get this at the end of the benchmark, my system specs are in the little info window to the right in realbench but I cannot upload or save results,any adviceThanks
Just got the new Kaby CPU and board on Sunday. First test drive seemed to be a decent CPU, set XMP in BIOS for Trident Z 3600 Cl17. It would run Aida64 @ 5.0 with 1.26v, XTU with 1.3v. I'm thinking this is pretty sweet until I tried the cache. Set ca...
Right now I can't exceed min and max cache ratio of 32 by a 4?4 GHz overclock. Any idea how to improve this?Thank,Alex
Hello guys! I'm new at the forum :-)*I have a few questions?I have the asus maximus ix hero board with the 7700k.I have 32gb of ddr4 ( 2x16gb 3000mhz c15 corsair lpx memory)System is very stable with everything on auto, (memeory at 2133) but when i c...
Hi guys,I've read lots of different options about the right overclocking mode for core voltage.Right now I run my 6850k at 4,4 GHz with 1.34 core voltage at fixed manual. Is this voltage fine to stay fixed on for longtime?What voltage mode you guys ...
I was seeing bad scores for a DDR4 memory and at the xmp and i was trying to find whyI couldn't find a solution as long as i searched, that doesn't mean i search everything.So i changed the max cpu ratio to match the multi of the cpu so the NB clock ...
Hello: I have been fiddling with the auto-tuning function in the AI Suite III - "Dual Intelligent Processors". I am a novice at OC so not sure about the settings. I have tried this with a target of 4.5 Mhz and 1.35 volts and also without any targets...
I just received 2 processor from a guy at Intel, the first thing I do is to try it out on my motherboard to see how those processors work. The first thing I noticed that my Z170 TUF only recognize 8GB of 2133mhz ram, with XMP in the BIOS is turn off,...
Is going for high BCLK a thing? I have an x99 Sabertooth and have tinkered around with it a little. I can get it stable at 167 bclk but it won't boot every time. Just curious if I'm wasting my time with it or should I work on it some more?
