Help
Overclocking & Tweaking
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Sign In to Post

Overclock strix 1080ti not OC - problem...help pls

HiI needed some help because I tried to overclok my 1080ti not-OC strix.I tell you ... my friend made me change the voltage curve by lowering the voltage to 1025 and raising thevcore to 2025 .... just crash with heaven ... i tried to raise the voltag...

New to Overclocking and Badly Need Advice

Hello Everyone,I am not new to computer but know very little about overclocking other than letting the AI Suite do it for me.I have a Maximus IX Hero with an Intel i7 7700K with 32 GB of RAM. My graphics card is a Nvidia 970 TI with 6GB of RAM. I a...

Overclocking 1800x on the C6H . Experiences?

Hi all. I'm relatively new to overclocking, most of my experience is on older Intel systems. I'm now on AMD platform and trying to overclock it to 3.9-4.0 and keep good temps. I'm now on 3.9 on 1.35 volts and I get between 72-82 during a full on stre...

akb88 by • Level 7
  • 1211 Views
  • 0 replies
  • 0 kudos

asus z370f and i7 8700non k adaptive voltage issue

I just got asus strix z370f mobo...and a i7 8700 non k...updated to latest bios...my cpu is realbench 15mins stress test at manual voltage 1.17v....but when i set adaptive with maxturbo mode voltage 1.18v and llc lvl1 voltage shoots to 1.28v...some o...

RAMPAGE V Edition 10 Unable to Overclock

Hey guys I'm new on the forums so bear with me if I post this thread in the wrong one. The problem I am facing is related to Overclock thats why I thought it would be best to post it here. Anyways I use ASUS RAMPAGE V Edition 10 with an Intel-core 68...

high temperature when overclocking

Recently, I built my first computer and tried to overclock using this tutorial :https://rog.asus.com/articles/guides/the-kaby-lake-overclocking-guide/ I don't really understand it, but I can adjust the vcore and the multiplier to get 4.7 gHz with vc...

7700K Horrible RealBench Results

I've been trying to figure out why my RealBench scores are so bad. I typically score between 72-79,000K and I have no clue why. I did have one score of 110,000 but cannot replicate it. I have defaulted back to the stock BIOS settings and still have p...

Tighten GSkill TridentZ RGB F4-3600C16D-16GTZR

I have GSkill TridentZ RGB F4-3600C16D-16GTZR tightened to 14-14-14-34 T1 and would like to try some tight settings on the secondaries..So far I have TRFC down to 300 from 535,and TREFI was on Auto at 11400 x3 and now at 34200..Are there any other s...

NIK111 by • Level 7
  • 3709 Views
  • 4 replies
  • 0 kudos

Luxmark failed

Recently, I built my own computer and did some stress test to overclock it. However, my PC always failed the Luxmark 3.1 test (both the scene file validation and image validation). I wonder if my monitor or graphic cards have problems, since someti...