After running Realbench Stress Test for just 15 minutes according to Core Temp, Idle Min was 26C and Max temp was 73C. The other 3 cores were within 2 or 3 degrees. My 7700K is at 4.9Ghz and while testing Core Temp read 1.3644 volts. Water cooled...
I have an 8700k, Maximus x code, Trident Z 32gb 3200mhz. I've overclocked to 5.1 yesterday and its passed realbench and prime95 stress tests with no issues.Today its frozen up twice while idle on the desktop, but no issues gaming or benching.My overc...
before I update the bios on my asus maximus viii hero motherboard can I clear the cmos from within the bios settings? also I'm currently overclocked, so would I have to clear the cmos to update the bios? and does the pc have to be off to push the cle...
Hello thereI have an i7 8700k and an Asus maximus x hero motherbord. I have a question regarding the asus multicore enhancement which I found in the uefi bios. Is this setting safe for the processor? I usually don't overclock (this option is kind of ...
Ok so when I run the stress test in RealBench I keep getting a black screen, the driver stopped responding message and Luxmark.exe stopped working.My initial thought was instability, however with my whole system at stock I'd still get the same thing ...
I'm looking for some comparison/data for the 8700K delidded vs stock. Are there any compilation threads or good articles that do specific comparisons? Is it generally accepted that the stock chips get considerably high temperatures when pushing throu...
Hi people,I have tried the Der8auer overclocking guide and for an unknown reason it will not go past 4901mhz when running cinebench, realbench or prime95. I have tried all AVX 0-3 and that does not change the max. I even changed multiplier to 51 and ...
I found my issue in my last post but can someone answer me why this is happening? Speed Shift stopping at 4902MHz?With it disabled i get poor performance in benchmarks. Realbench started at 5GHz and after 5 mins slowed to 4.5GHz. Temps don't look too...
I have been trying to overclock by new 1950x on the Zenith Extreme and have a strange error. If I try to set the voltage manually, 1/4 startups will fail with an error 92 VGA Bios failed. If I leave it on Auto this does not happen but then I can't fi...
Hello all,I noticed that the refresh rate is 5 seconds for all:-CPU frequency -CPU RPM-CPU TempIs there away to decrease this interval ? to be 2 seconds for example ?
