i used AUTO TUNING FEATURE from Asus Suite II and it overlocked my cpu and my ram. i have a g skill 8gb(4gb x2) ddr3-1600 pc312800 9-9-9-24 rams. i dont want to overclock my rams because it may damage it since its cas are 9.How can i overclock my cpu...
Hello everyone I have a question. I have a Z790 Hero Maximus, i9-14900k, and dominator titanium first edition 32gb (2x16) 7200 MT. While going over the supported XMP profiles I noticed that the SKU: CMP32GX5M2X7200C34FE wasn't on there but CMP32GX5M2...
Using MAXIMUS VI EXTREME, 32gb 2400 Ram, 4770k, Samsung SSD(no other drives connected)When powering on my PC, the ROG screen remains for around 55 seconds. This makes booting up very slow, this occurs regardless if I have my windows SSD plugged in, ...
Hello Everyone, This is a bit of a weird one for you.I'm currently trying to get to the bottom of an issue where high relative humidity causes my PC to not start up.Hopefully someone here might have run into this before and may be able to shed some l...
Hi, been trying to run these g.skill modules in a proper way, instead of the default 4800Mhz speed.I tried to activate DOCP and it immediately gets the correct settings, but then if I save the system doesn't boot and I'm forced to reset the CMOS manu...
Hello, I am looking for a graph or explanation of the different levels of load line calibration on this motherboard. I have tested level 4/5. I have not tested 6/7/8, and before I do I would like to know what these look like in practice. I know some ...
Hi, i am here about bios settings, I tried following people recommendationsReset to defaultPut ram xmp to tweakedPut bios optimized multicore enhancementsAI Overclock for the performance and efficient cores frequenciesUndervolt 0.075 via offset I fou...
Hello all,I just built my new rig and every so often my USB connected keyboard and mouse would disconnect and reconnect. My devices are connected the the motherboard IO USB ports. Specifically, I'm using the USB 3.2 Gen2 ports.I've updated all the ...
I'm having quite a difficult time getting XMP to work on my new machine. I've gone through two seperate 14900k CPU's One was 96 GLOBAL (102P 82E 64MC) and my current 95 GLOBAL (101P 80E 75MC) I purchased an Apex Encore from Micro Center along with ...
Hello.I am asking for advice on how to undervolt this processor.I have high temperatures in games,around 92C.Everything is set to default.I will ask experienced users for advice on where and what to set in the bios.Thanks for the advice.
