GL503 undervolt
I have been wanting to get better performance out of my i7 7700hq. I am just wondering what other people have undervolted theirs to. Also what FPS they are seeing once they have undervolted their cpu.
Forum Posts
4.4ghz TR 1950x on water, is it possible?
Forgive me if I sound like an FNG but the last time I did serious overclocking was the Athlon XP days. Zenith Extreme, 1950x, AS5, Liqtech AIO 360 with push-pull fan setup, high CFM SanAce server fans. This thing is a monster and at the stable 4.1 I ...
Under Volting I7 8700K on ASUS Maximus Hero X Wifi AC
Good day,Looking to under volt my CPU using this Board, I don't see an option for adaptive voltage (I may need to clear cmos for this ? ) Is this the preferred method or should manual method work? what is your recommended basel...
Rampage V Extreme - dual boot - disable m.2 drive
Hi,I have the Rampage V Extreme board (older model, not the newer 10 version).I have a number of drives connected and have a dual boot option enabled utilising the overclocking profile setting in the BIOS (BIOS version 3801). Here, I have saved two d...
knowing when you have reached the limit.
So, rig definitely up and running now.Realbench results.4.6ghz and temps hitting 96° on cpu package + 91° vrm, most cores lower.that's as far as I go on the cpu, for now! time to move on to memory, I am sure that can be tweaked a bit (4000hzs?), an...
ROG Strix GeForce® GTX 1060 OC settings
what would be the best settings for that video card for professional mode GPU Tweak II?I have tried to adjust but the games crashes
CH VII + GSkill TridentZ 3466
Just bought the x470 CH + 2700x + TridentZ 3466mhz memoryMemory is F4-3466C16D-32GTZR - 2 x 16GB KitDoes anyone else use this memory?The board wont boot setting the memory to the 3466 profile in bios. Should i just get another kit instead?
Hot pch temps on my maximus 10
Hi allI"ve a question is it dangerous to have a 52 degres temps at load on my pch sensor ?My settings and hardware:i7 8700 k at 4.6Ghz ALL CORE SYNC xmp set to 3900 adaptive mode cpu v max 1.270 vVCCIO/VCCIA 1.20/1.15DRAM 1.3550Vthe temps are t...
Super low realbench 2.56 scores
I'm getting a really low realbench score and have no ideas what could be causing it. The system seems to be working fine in most other benchmarks and in general usage. I've overclocked to 4.9ghz. Any help would be appreciated.
Score Drop ~5000pts after Win10 1803 Update
Maximus VI Hero/BIOS 1603, 4770k, 16GB TridentX 2400 10-12-12-31 CR1Just ran 3 times following my usual procedures, after the 1803 update I'm averaging a roughly 5000 point drop from previous runs last weekend.Only other change I've done is increase ...
