.rbr file
Alright, I have searched on my computer as well as on the forum, but iI just can't find where the .rbr file is saved.Would sure love some help, eventhough I appear to have a truly inferior system, lolCM
Alright, I have searched on my computer as well as on the forum, but iI just can't find where the .rbr file is saved.Would sure love some help, eventhough I appear to have a truly inferior system, lolCM
I own a R5 2600x, running on an Asus B450i and ram @3466mhz tight timings and - 0.06v cpu offset. (fully 24/7 stable) Just by switching to PE level 2 just gained me +100 score on cinebench. Woa, zero difference in temps really (running a dark rock 4 ...
Can someone point me to a guide that explains overclocking while maintaining the ability for voltage and speed to drop while not under load? Most of what I see online creates an overclock which is constant independent of load. Thank you!
AMD Ryzen 5 2600 (Base 3.4GHz, Boost 3.9GHz)Asus ROG Strix B450-F GamingCorsair Vengeance LPX 2x16GB 3200MHz CMK32GX4M2L3200C16EVGA GTX 1070 Ti FTW2EVGA CLC 240 AIOEVGA DG-76 CaseEVGA SuperNOVA 1000W G2 80+ GOLD PSUSanDisk Extreme Pro 240GB SSD Boot ...
Hello, I just upgraded from a i7 8700K to the i9 9900K and I'm very much regretting it. My XMP was stable with the i7. I was able to do (4200MHz) 18,18,18,38 (CL), (tRCD), (tRP), (tRAS) timings perfectly with the i7. Now my system won't make it past ...
I’m not familiar with this. What should I set this to?*
I updated the BIOS because I am planning on testing out a 9900K in the near future and my 8700K it started running hotter than before. I did a few cinebench runs and the score is almost 1000 points lower. Then I remembered about the Spectre debacle a...
Can someone pls tell me should i drill more holes in my laptop case?Can be something wrong with it?For now i drilled 2 holes 40mm under fan and it droped temps a lot
Hi guys.I have a 6700k stock on a z170 pro gaming mb. I set my core voltage to adaptive since on auto the mobo raised it to 1.365V, i'm targeting around 1.25 so i set 1.25v on aditional turbo mode voltage and a 0.001v offset. But when i test it with ...
I think my board is f'ed. Installed it yesterday. 9900k. Seeing vdroop from 1.35 down to 1.30 under load. Setting the voltage manually. LLC 7. LLC 8 does no better. I can't get an overshoot even if I wanted it. Crashes my system every time. Disappoin...
User | Count |
---|---|
2 | |
2 | |
1 | |
1 | |
1 |