Hello fellow ROGers.I have a problem here.I've noticed that there is no vcore/vrvout etc. field in motherboard section of HWInfo64 for my Strix x99 Gaming. I've done some research and it looks like this mobo is somehow not capable of monitoring Vcore...
Hey All,I'm trying to figure out why Asus UEFI says my target AVX Frequency is 3700Mhz, but in all my AVX tests (mainly Prime95) and any all cores only hit 3600Mhz.I have tried AVX offset at 0 and auto, but it's the same. I've tried MCE enabled and d...
Been reading this forum for while now and I must say there is a crazy amount of good advice and knowledge when you start digging. Thank you guys for that.Alright. I put together my new rig during Christmas. But the benchmarks were not good enough. Si...
I need somebody that has experience with this mobo or similiar.. I want a stable 4.5ghz overclock using offset, not fixed. What settings for digi control, pll cpu, all the settings, what should they be set to? Thank you!
I have a G.Skill R32GB RAM that I'd like to get running at the 4000hz advertised speed (RAM specs below).Having real trouble trying to set them manually (XMP I and II both failed as presets in the BIOS).Does anyone have a guide using the ASUS ROG bio...
Hi,I recently performed a coffee lake mode on my Asus Z270-WS motherboard and got it running with a 9700K. Only one problem. If I set 1.325v in bios I get 1.280 volts reported by software. Experimenting with AC DC load line but not sure what else or ...
Hi, Looking for a bit of help with something. I overclocked my 4770K to 4.2Ghz and the task manager reports the speed as 0.8Ghz, its not though as all other programs report at it 4.2Ghz (AIDA64 being my main monitoring program). Honestly doesn't both...
Hy, i have a schynte mugen 5 rev. b and the first core is by 14 degrees celsius hotter then the third. I did like 5 times remounting the cooler and still the same temperature. What it could be? My cpu is overlcoked at 4.5 ghz and the motherboard is a...
A couple weeks ago my custom loop's pump died and as such my rig locked up and shut off while I was using it. After replacing the pump, my PC entered a reboot loop every time I powered it on that day, rebooting almost every time a few seconds after t...
Hey Guys, 2 Days ago , i I've tried 9900K delid , der8auer Intel 9th Gen. OC-Frame tool and results are great. First of all materials ; 9900K Batch# : L906D069-Delid Tool : der8auer Delid-Die-Mate 2-der8auer Intel 9th Gen. OC-Frame-Cleaning : -Quicks...
