cancel
Showing results for 
Search instead for 
Did you mean: 

[Audio problem please help] I think is related to VDDQ_TX

FacundoQ
Level 7

Hi, i have problems with my audio (crackling/popping) when i put the XMP, i have 3200mhz and 1.35v, but the VDDQ_TX seems too low, it is 1.2v and needs to be on 1.3v.

I saw some guy post that said he raised the VDDQ voltage to 1.3v and the audio problem is gone.

Now the problem is, i dont find the VDDQ_TX voltage on my BIOS.

I have the asus bios but the normal one not the rog.

vddqtx.png

108 Views
2 REPLIES 2

Silent_Scone
Super Moderator

Hi @FacundoQ 

 

Which board?

Extreme Tweaker > Advanced Memory Voltages.

If raising this helps, it's possible the system might not be stable. Ensure to update to the latest audio drivers available on the support site, also.

13900KS / 8000 CAS36 / ROG APEX Z790 / ROG TUF RTX 4090

Hi, my board is H610m-k

I don't have the section "Extreme Tweaker" Just Ai Tweaker and i don't find "Advanced Memory Voltage".

My driver audio is updated.

The headset turns off itself, rgb goes crazy, crackling audio.

I tested on another pc and it works fine.