Asus AI Suite 3 Issue

[Sebastain]

Could some one tell me why ASUS AI SUITE 3 is doing this?? The CPU fan has a " ! " now and wasn't there before I overclocked....

[Chino]

Do you have a fan connected to the CPU_OPT header?

[HiVizMan]

Could you please list all your hardware.

[Sebastain]

No I do not have a fan connected to the CPU OPT header, Like I stated above it doesn't do that till I run the fan expert or do the 4 way optimization. If you delete the program and reinstall all the fan boxes run properly once again so go figure....



Asus Z-87 Expert motherboard

Intel Core i5 4670k " HASWELL "

OCZ-Vertex4 128gig "SSD"

Western Digital WDC5003AZEK "HDD"

G Skill Rip jaws " F31600c9-8gxm "16gig"

EVGA GeForce GTX 650 Ti

Corsair HX-750 power supply

Corsair Hydro series H-90 Cooler

Asus DRW-24F1st DVD drive

Cooler Master 932 " Blue edition " Case

[Chino]

Since no fan is connected to the CPU_OPT header, then the 0 RPM reading inside AI Suite III is just the way it should be. No problems there.

[Sebastain]

But why is it working correctly till you overclock or run fan expert is my biggest concern..... :confused:

[Chino]

Perhaps it's a bug.

[HiVizMan]

Does that behaviour happen with FanXpert if you are on stock or defaults?

[Sebastain]

ASUS AI SUITE 3 working correctly version 1.0041 updated to 1.0051 as long as I don't overclock or run fan expert 2. But what is the point of having the program if you can not use it. :mad:


I have tried both overclocked and stock settings I get the same results!