02-28-2013
03:37 PM
- last edited on
03-06-2024
09:55 PM
by
ROGBot
03-01-2013 05:44 AM
03-01-2013 06:54 AM
HalloweenWeed wrote:
So this is a reminder for all of you who are OCing: Look at the other LEDs on the board. FYI.
03-01-2013 12:40 PM
HalloweenWeed wrote:
I just had an OC fail that got me thinking about OC failure diagnosis techniques. I had an OC profile that was stable forever in LinX and playing games, but just very occasionally gave me a BSOD, about every several days, usually 101. And also sometimes failed coming out of sleep mode. Already raised Vcore up 0.02V more (to +0.1V), with no difference, and that was hitting my maximum allowable core temps. So today I had another failure coming out of sleep, and this time I had the time to look into it properly; so I rolled the computer out of it's "slot," and read the debug LEDs. They were AF and DRAM_LED. The AF didn't tell me much, but the DRAM_LED did.
So I thought about my DRAM settings, they were Mfgr's spec: What could be off? Well the only thing that comes to mind is DRAM V. The mobo sensors and settings could easily be 0.05V off, as they are not nearly as accurate as a good Fluke DMM. I tried raising the DRAM V by 0.05V and viola, no nore glitches - so far. If it is stable long-term I might even try lowering my Vcore back to +0.08.
After this I started thinking, how many other people are looking at their LEDs when they have a problem like this with their OCs? They can be a great help. Did you even know, do you even remember, that the RIVE has 9 green "Voltminder LED II" LEDs, next to the "start" button, designed to help troubleshoot your OC failures? For some people, this is a reminder. For others, it may be enlightenment. I know that some of you out there have been using this all along. But I have not heard anybody speak of these (except the debug two-digit LEDs) when discussing thier OC issues, it's as if they don't even know. I'm even noticing that the ppl with troubleshooting issues aren't looking at the Q LEDs, I have to ask them, and then they check.
So this is a reminder for all of you who are OCing: Look at the other LEDs on the board. FYI.