So after many other adventures (read my other threads) i have been considering the airflow in my case for the build in my signature. currently i have a my triple rad at the top as a push/pull exhaust, the double rad at the bottom as a pull intake (through a rather rough case cut) and the stick 1500mm on the back as intake. There are also two other 140mm fans inside the case that move air but aren't intake or exhaust. I am looking for any suggested setups, additions, or other input that would help provide optimal airflow through the system. I have look at this -
http://www.amazon.com/gp/aw/d/B000NV9DMC and wondered if they are any good or useful in my case.
Thanks!
CPU: Intel i7 3970X
Mobo: Rampage IV Extreme
Memory: 32GB (4x8GB) G.Skill RipjawsX 2133MHz
GPU: Sapphire HD 7990 6GB
Cooling: Dual Loop Custom Cooling
Koolance Dual Bay Resevoir with 2 Swiftec MCP655-PWM pumps in parallel
Loop 1: CPU Dedicated with Triple Rad Alphacool UT60 Push/Pull
Loop 2: GPU Dedicated with Dual Rad Alphacool UT60
PSU: OCZ ZX 1250 Watt
Case: Corsair Obsidian 800D
