- last edited on by
ROGBot
2012 is an exciting time to need a graphic card upgrade. New PCI-Express 3 cards have hit the market and include the Nvidia GeForce GTX 600 series, such as the recent GTX 680, and AMD’s Radeon HD 7000 Series, including ASUS designed cards such as the Radeon HD 7970 DirectCU II, 7950 DirectCU II and 7870 DirectCU II as well as their TOP pre-overclocked variants.
While these cards fill the news and people’s upgrade anticipations right now, you don’t need PCI-Express 3.0 or even the latest series of graphics cards to overclock though – generally speaking any graphics card can be overclocked in some way. This guide explains the process of how to overclock your graphics card with GPU Tweak, and applies to Nvidia and AMD graphics cards alike.
The Radeon HD 7970 DirectCU II TOP has an upgraded PCB designed by ASUS engineers, giving it potentially more overclocking overhead.
Downloads you will need:
First of all download the latest version of ASUS GPU Tweak and AMD Catalyst drivers to get support for the latest models. For CrossFireX setups also download the latest version of CAP.
What is ASUS GPU Tweak?
GPU Tweak allows you to optimize clock speeds, voltage and fan speeds on up to four graphics cards independently or simultaneously, you can also select between GPU Tweak’s Standard or Advanced modes depending on your level of experience.
A good stress test to push your overclock stability is FurMark, while GPU-Z is a must and is included with the ASUS GPU Tweak; however you can also download the latest version separately as an ROG Skinned GPU-Z.
What is FurMark?
FurMark is an OpenGL-based GPU stress test utility (also called GPU burn-in test). It makes it possible to push the GPU to the max in order to test the stability of the graphics card (and the PSU too!) leading to maximum GPU and VRM temperatures. That’s why FurMark is often used by overclockers and graphics cards fanatics to validate an overclocking, to test a new VGA cooler or to check the max power consumption of a video card.
Before we start
Open which ever version of GPU-Z you are using. Select the sensor tab, look at the bottom and tick both the boxes. You will be prompted to select a default location for the log file it will be creating. Why do we want this? Well if the overclock fails it is handy to look at the logged file and see what the possible cause of the failure was, as if your system freezes up you cannot check what you’re GPU temperatures were when the system froze. This way we can check the history and then make informed calls on the correct way forward.
Create a baseline
Open your FurMark stress test – Select the profile you wish to run, I suggest you use the profile that will match as close to your gaming resolution. I used the 1920×1080 (1080p) setting. Remember the point of this exercise is to establish knowledge of the baseline stability of your graphic card at stock speeds. You can use any of the pre-set profiles too, as long as you are using the same settings each time we do a stability test.
Once we have these temperature numbers and are confident that the card is running perfectly at stock speeds, then we can overclock!
First: Memory Overclocking
The first thing to do is see what the maximum memory frequency is.
Open GPU Tweak
Either move the slider for the memory to up by 100MHz using the mouse, the keyboard arrow keys, or directly key in a value 100MHz higher. The offset value will tell you how far from stock MHz it’s been changed.
Apply the setting.
Open FurMark and run the benchmark preset that you prefer.
If your system passes, increase the frequency by 100MHz on the slider again.
Apply and run FurMark again
Repeat until your system fails the benchmark test or crashes.
Drop back 100MHz from the last used setting using the slider
Run the benchmark again to check
If passed successfully stop there and record the frequency that your system passed the benchmark test successfully at.
Reset GPU Tweak to default
We are not going to change any voltages in this basic guide until the very end. We now have the stand alone maximum memory frequency for our graphics card. It is actually unlikely that we will achieve this frequency when the GPU core is overclocked as well (due to reasons such as EMI, power draw, and induced heat from the GPU affecting the GDDR5 chips and PCB tracing, but what we do have is a known range within which we can work.
While these cards fill the news and people’s upgrade anticipations right now, you don’t need PCI-Express 3.0 or even the latest series of graphics cards to overclock though – generally speaking any graphics card can be overclocked in some way. This guide explains the process of how to overclock your graphics card with GPU Tweak, and applies to Nvidia and AMD graphics cards alike.
The Radeon HD 7970 DirectCU II TOP has an upgraded PCB designed by ASUS engineers, giving it potentially more overclocking overhead.
Downloads you will need:
First of all download the latest version of ASUS GPU Tweak and AMD Catalyst drivers to get support for the latest models. For CrossFireX setups also download the latest version of CAP.
What is ASUS GPU Tweak?
GPU Tweak allows you to optimize clock speeds, voltage and fan speeds on up to four graphics cards independently or simultaneously, you can also select between GPU Tweak’s Standard or Advanced modes depending on your level of experience.
A good stress test to push your overclock stability is FurMark, while GPU-Z is a must and is included with the ASUS GPU Tweak; however you can also download the latest version separately as an ROG Skinned GPU-Z.
What is FurMark?
FurMark is an OpenGL-based GPU stress test utility (also called GPU burn-in test). It makes it possible to push the GPU to the max in order to test the stability of the graphics card (and the PSU too!) leading to maximum GPU and VRM temperatures. That’s why FurMark is often used by overclockers and graphics cards fanatics to validate an overclocking, to test a new VGA cooler or to check the max power consumption of a video card.
Before we start
Open which ever version of GPU-Z you are using. Select the sensor tab, look at the bottom and tick both the boxes. You will be prompted to select a default location for the log file it will be creating. Why do we want this? Well if the overclock fails it is handy to look at the logged file and see what the possible cause of the failure was, as if your system freezes up you cannot check what you’re GPU temperatures were when the system froze. This way we can check the history and then make informed calls on the correct way forward.
Create a baseline
Open your FurMark stress test – Select the profile you wish to run, I suggest you use the profile that will match as close to your gaming resolution. I used the 1920×1080 (1080p) setting. Remember the point of this exercise is to establish knowledge of the baseline stability of your graphic card at stock speeds. You can use any of the pre-set profiles too, as long as you are using the same settings each time we do a stability test.
Once we have these temperature numbers and are confident that the card is running perfectly at stock speeds, then we can overclock!
First: Memory Overclocking
The first thing to do is see what the maximum memory frequency is.
Open GPU Tweak
Either move the slider for the memory to up by 100MHz using the mouse, the keyboard arrow keys, or directly key in a value 100MHz higher. The offset value will tell you how far from stock MHz it’s been changed.
Apply the setting.
Open FurMark and run the benchmark preset that you prefer.
If your system passes, increase the frequency by 100MHz on the slider again.
Apply and run FurMark again
Repeat until your system fails the benchmark test or crashes.
Drop back 100MHz from the last used setting using the slider
Run the benchmark again to check
If passed successfully stop there and record the frequency that your system passed the benchmark test successfully at.
Reset GPU Tweak to default
We are not going to change any voltages in this basic guide until the very end. We now have the stand alone maximum memory frequency for our graphics card. It is actually unlikely that we will achieve this frequency when the GPU core is overclocked as well (due to reasons such as EMI, power draw, and induced heat from the GPU affecting the GDDR5 chips and PCB tracing, but what we do have is a known range within which we can work.
.jpg "volts240"){kind=avatar}
_ wrote:
2012 is an exciting time to need a graphic card upgrade. New PCI-Express 3 cards have hit the market and include the Nvidia GeForce GTX 600 series, such as the recent GTX 680, and AMD’s Radeon HD 7000 Series, including ASUS designed cards such as the Radeon HD 7970 DirectCU II, 7950 DirectCU II and 7870 DirectCU II as well as their TOP pre-overclocked variants.
While these cards fill the news and people’s upgrade anticipations right now, you don’t need PCI-Express 3.0 or even the latest series of graphics cards to overclock though – generally speaking any graphics card can be overclocked in some way. This guide explains the process of how to overclock your graphics card with GPU Tweak, and applies to Nvidia and AMD graphics cards alike.
The Radeon HD 7970 DirectCU II TOP has an upgraded PCB designed by ASUS engineers, giving it potentially more overclocking overhead.
Downloads you will need:
First of all download the latest version of ASUS GPU Tweak and AMD Catalyst drivers to get support for the latest models. For CrossFireX setups also download the latest version of CAP.
What is ASUS GPU Tweak?
GPU Tweak allows you to optimize clock speeds, voltage and fan speeds on up to four graphics cards independently or simultaneously, you can also select between GPU Tweak’s Standard or Advanced modes depending on your level of experience.
A good stress test to push your overclock stability is FurMark, while GPU-Z is a must and is included with the ASUS GPU Tweak; however you can also download the latest version separately as an ROG Skinned GPU-Z.
What is FurMark?
FurMark is an OpenGL-based GPU stress test utility (also called GPU burn-in test). It makes it possible to push the GPU to the max in order to test the stability of the graphics card (and the PSU too!) leading to maximum GPU and VRM temperatures. That’s why FurMark is often used by overclockers and graphics cards fanatics to validate an overclocking, to test a new VGA cooler or to check the max power consumption of a video card.
Before we start
Open which ever version of GPU-Z you are using. Select the sensor tab, look at the bottom and tick both the boxes. You will be prompted to select a default location for the log file it will be creating. Why do we want this? Well if the overclock fails it is handy to look at the logged file and see what the possible cause of the failure was, as if your system freezes up you cannot check what you’re GPU temperatures were when the system froze. This way we can check the history and then make informed calls on the correct way forward.
Create a baseline
Open your FurMark stress test – Select the profile you wish to run, I suggest you use the profile that will match as close to your gaming resolution. I used the 1920×1080 (1080p) setting. Remember the point of this exercise is to establish knowledge of the baseline stability of your graphic card at stock speeds. You can use any of the pre-set profiles too, as long as you are using the same settings each time we do a stability test.
Once we have these temperature numbers and are confident that the card is running perfectly at stock speeds, then we can overclock!
First: Memory Overclocking
The first thing to do is see what the maximum memory frequency is.
Open GPU Tweak
Either move the slider for the memory to up by 100MHz using the mouse, the keyboard arrow keys, or directly key in a value 100MHz higher. The offset value will tell you how far from stock MHz it’s been changed.
Apply the setting.
Open FurMark and run the benchmark preset that you prefer.
If your system passes, increase the frequency by 100MHz on the slider again.
Apply and run FurMark again
Repeat until your system fails the benchmark test or crashes.
Drop back 100MHz from the last used setting using the slider
Run the benchmark again to check
If passed successfully stop there and record the frequency that your system passed the benchmark test successfully at.
Reset GPU Tweak to default
We are not going to change any voltages in this basic guide until the very end. We now have the stand alone maximum memory frequency for our graphics card. It is actually unlikely that we will achieve this frequency when the GPU core is overclocked as well (due to reasons such as EMI, power draw, and induced heat from the GPU affecting the GDDR5 chips and PCB tracing, but what we do have is a known range within which we can work.
Thanks for the good info on overclocking, I was wondering if this will work with my videocard Asus RTX 3070 STRIX??
