Silent Scone@ROG wrote:
SOC is sensitive to high voltages also, so you may want to tune values from 1v VSOC with DCOP and work from there. PROCODT can likely be left in Auto.
Also try adjusting IOD VDDG and CCD values.
1-1.05 and CCD around 0.98 to 1.05 IOD
I am currently in the process of overclocking a new set of RAM that I just bought a couple of weeks ago.
- Turn on DOCP (advertised speed of 3600mhz) -> PC fails to boot
- Set SOC Voltage to 1.2 and PROCODT to 80 ohm -> PC fails to boot
Second Round (Starting at 2133mhz):
- SOC Voltage at 1.1
- DRAM voltage at 1.40
- Timings 16-20-20-40 and tCWL at 16
Was able to get to 3000mhz (unstable going higher). What on earth is going on here??? These are B-DIE and I cannot even hit the advertised speed.
Has someone experienced this issue before? Are we talking a BIOS issue here? BIOS version is 3401 (March 2021)