Hi
I was able to get a stable overclock of 4.6 on 1.215 volts. However I get bsod on 4.7 even when increasing all the way to 1.35 volts.
My thermals do not appear to be the issue. I have a noctua d15s.
In my bios, I have the multiplier set to 46 sync all cores and voltage at 1.215. Everything else is auto.
Is there any other setting I should be adjusting? Cache voltage, input voltage?
It seems strange that I can be stable 4.6 at relatively low voltage but not be able to go 4.7. i use real bench to stress test
Thanks in advance
.
