Z9PED8 WS and AMD FirePro S10000 - does now show video

[SeaGu1]

Hi,

I was wondering if someone had a similar Problem.
I have Z9PED8 WS with 2x XEON 2620 V2 and 128GB of ECC RAM.

I have the latest BIOS, but there is no Video Output. However it seems like the Computer never the less starts. I have tried AMD 7970 from Gigabyte and while there were some issues in Slot 1, it always starts in Slot 2.

When I had only one CPU S10000 it all would work and Show Screen etc.

I see there is a discussion about NVidea Cards, does this issue (and proposed Beta BIOS) resolve the issue?

Thanks.

[HiVizMan]

Hello there

I obviously do not have the same board nor the CPUs to test for you. But what is key is that the system worked fine with one CPU but not with two.

Could you swap the CPU's around or test with one CPU again, - testing both individually if you know what I mean. Then see with both.