©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Gishan · ‎08-25-2013

Hi,

I can't get Wake on LAN working with my Rampage IV Extreme.
The only post I found was from 2012 which did not solve it.
Don't have a link to this old post as I found it while browsing on my phone.

- I'm currently running BIOS 4310 and Windows 8.
- Power on PCIE is Enabled in BIOS.
- Energy settings under Windows are enabled (even tried to disable 'only power on magic packet')

If you need further specs just answer!
Anyone got suggestions what I could do?

CPU: 5930K @ 4.5 GHz, GPUs: 2x GTX Titan, Mobo: Rampage V Extreme, Ram: 32GB Dominator 2800
Sound: Essence STX & SP 2500, HDDs: 1x Samsung 830, 2x 840 Evo, PSU: Corsair AX860i, Case: 900D
Cooling: Full custom w/c loop (CPU, both GPUs), Build Log: http://linustechtips.com/main/topic/14886-project-hermes-900d-titan-sli/

Premudriy · ‎08-25-2013

I've ran into this kind of problem before. Here's what helped me:

Keep Power on PCIE enabled in BIOS, just like you have it now. Make sure Erp Ready is Disabled in BIOS->Advanced->APM. Then do

1. In windows go to your LAN adapter Power Manager settings and un-check all the options. Click ok.
2. Power off the system and unplug it. Wait a minute for all the capacitors charge to dissipate.
3. Power back on, go to LAN Power Manager options and check these:
- Wake on Magic Packet
- Wake on Magic Packet from power off state.
- Wake on Pattern Match.

Now shutdown and test. I hope it helps you.

Gishan · ‎08-29-2013

Sorry, was busy.
I've just tried it and it's still not working. 😕

CPU: 5930K @ 4.5 GHz, GPUs: 2x GTX Titan, Mobo: Rampage V Extreme, Ram: 32GB Dominator 2800
Sound: Essence STX & SP 2500, HDDs: 1x Samsung 830, 2x 840 Evo, PSU: Corsair AX860i, Case: 900D
Cooling: Full custom w/c loop (CPU, both GPUs), Build Log: http://linustechtips.com/main/topic/14886-project-hermes-900d-titan-sli/

HiVizMan · ‎08-27-2013

OP can you confirm that your request has been resolved?

To help us help you - please provide as much information about your system and the problem as possible.

Gishan · ‎08-30-2013

I've used wireshark to test if the computer gets the magic packet while running.
Everything seems fine - every packet arrives, there is no loss.

So it must be the nic thats not responding while the pc is shut down...
Any ideas?

CPU: 5930K @ 4.5 GHz, GPUs: 2x GTX Titan, Mobo: Rampage V Extreme, Ram: 32GB Dominator 2800
Sound: Essence STX & SP 2500, HDDs: 1x Samsung 830, 2x 840 Evo, PSU: Corsair AX860i, Case: 900D
Cooling: Full custom w/c loop (CPU, both GPUs), Build Log: http://linustechtips.com/main/topic/14886-project-hermes-900d-titan-sli/

Gishan · ‎08-30-2013

Soooo... I just figured it out!
Apparently the power management got changed with windows 8 - WOL is only available in hibernation or sleep mode.

source: http://support.microsoft.com/kb/2776718/de

CPU: 5930K @ 4.5 GHz, GPUs: 2x GTX Titan, Mobo: Rampage V Extreme, Ram: 32GB Dominator 2800
Sound: Essence STX & SP 2500, HDDs: 1x Samsung 830, 2x 840 Evo, PSU: Corsair AX860i, Case: 900D
Cooling: Full custom w/c loop (CPU, both GPUs), Build Log: http://linustechtips.com/main/topic/14886-project-hermes-900d-titan-sli/

WOL with Rampage IV Extreme