weird BSODs when Crossfire enabled

[mudkip]

Downloaded the 11.10 abd cap 3 installed and all seemed well, then ccc crashed and upon reboot i would get amd driver crashed and recoverd error. And now ccc will not open at all. Uninstall and reinstall yeilds same result. When installing the drivers i get instaltion complete with warnings. Tried aReset on the bios and checked every thing still a no go. Not sure if i have a corrupt windows install or bad gpu mobo. Going to take one gpu out see what that does. I can turn crossfire off and it all seems to work just fine. or if CCC is not installed it wont BSOD since crossfire is disabled. Any other advice would be appreciated

[mudkip]

Just tried to post but its not showing up. a little more information, I get the error only in windows with the stick in the "bad slot" bios loads fine. another weird issue is when i get f8 to get into the boot in safe mode menu my keyboard no longer works. not sure if a corrupt windows install would cause these issues

[Raja]

mudkip wrote:
another weird issue is when i get f8 to get into the boot in safe mode menu my keyboard no longer works. not sure if a corrupt windows install would cause these issues

Safe Mode does not load USB 3.0 drivers so if your keyboard is in a USB 3.0 port it will not work. Your issue seems centered around CPU/NB voltage at first approximation (need to keep the other r-r at 5 and 2T also)...

-Raja

[mudkip]

Raja@ASUS wrote:
Safe Mode does not load USB 3.0 drivers so if your keyboard is in a USB 3.0 port it will not work. Your issue seems centered around CPU/NB voltage at first approximation (need to keep the other r-r at 5 and 2T also)...

-Raja

I appreciate all the help RAja, I still am unable to find my jump drive to get screenshots but i have my voltage set to Auto. and yes my RR is 5 and 2t. Im not sure what else i can do. If i dont get it figured out by monday i may put in for a RMA

[Raja]

mudkip wrote:
Im doing this wile im away from computer. Cant find my flash drive to get screens either. I have every thing set to auto. my timings are set to 9-10-9-28 default for the ram. This happens even with the r-r at 5 and 2t

What's the CPU/NB voltage?

[mudkip]

I can move the ram around in diffrent slots. but once it hits that one slot on my board it all goes crazy. im going with bad slot.